Incubation rookie

[Wellsflock]

Hello everyone,
Im new to the incubation process. Today i discover I’d made a huge rookie mistake by placing my additional thermostat probe by my turner motor and realized my incubator heat was off by 2.5 degrees. I had candled at day 6 and most were alive, I candled them again on day 10and noticed only 4 had seemed to really grow and be moving. Now I’ve increased my temp slowly back to 99.9 over 24hrs.
Is there any chance of survival?
Thank you everyone

 

[feedman77]

Yes they should be fine.

They may hatch a day or 2 early.

 

[paneubert]

Day or 2 late since the temp was low due to the motor heat giving a false high reading.

 

[feedman77]

Day or 2 late since the temp was low due to the motor heat giving a false high reading.

@paneubert is right I was thinking incubator was running 2 degrees hot.

 

[Wellsflock]

Thank you, I’m keeping my hopes up

 

[Joeschooks]

Yes I’d say there is a chance and agree with the others that they may be a day or two late. Lower temperatures are less damaging than high temperature spikes. Good luck with your hatch.