- Jul 28, 2012
- 317
- 47
- 103
have just had another failure with this incubator(janoel 48)-
first try was 2 out of 22,rest were DIS no internal pip
second try 7 out of 20 ,rest DIS no internal pip
those that hatched seemed to be a bit wet around neck /head ,didn't fluff up in those areas for a day or so ,fluff is thin can see skin patch's,
temp solid rite thru ,humidity 35-40% day o-18 ,last 3 days 55-60%
2 separate digital thermometers /hygrometers, that were calibrated
my thoughts were insufficient angle of tilt,
my first hatch was 18 out of 19 in a different borrowed incubator with inconsistent temps but hand turned
.
am i better to try converting to semi manual using egg trays or remove & go to manual hand turning ?
thought a better machine would have less problems ,any suggestions or ideas on the results appreciated
cheers Pete
first try was 2 out of 22,rest were DIS no internal pip

second try 7 out of 20 ,rest DIS no internal pip

those that hatched seemed to be a bit wet around neck /head ,didn't fluff up in those areas for a day or so ,fluff is thin can see skin patch's,
temp solid rite thru ,humidity 35-40% day o-18 ,last 3 days 55-60%
2 separate digital thermometers /hygrometers, that were calibrated
my thoughts were insufficient angle of tilt,
my first hatch was 18 out of 19 in a different borrowed incubator with inconsistent temps but hand turned

am i better to try converting to semi manual using egg trays or remove & go to manual hand turning ?

thought a better machine would have less problems ,any suggestions or ideas on the results appreciated
cheers Pete