Incubator Help

slick4591

Songster
8 Years
Jun 23, 2011
545
6
101
Farmersville, TX
I'm building an incubator out of a commercial refrigerator and need some advice about Flex Watt (11") and the fan. The Flex Watt will run down the back and the bottom. At this point I can mount the fan either over the Flex Watt or in the top. The fan is housed in a metal case which is open at the back and keeps the fan a couple inches from the surface. In either case the fan will be pointed at the door of the incubator so it will bounce off and distribute the air. Which would be the better location of the fan? Thanks!
 

New posts New threads Active threads

Back
Top Bottom