- Sep 7, 2011
- 2
- 0
- 6
I tried at first to have the fan running all the time when building my incubator,but because of the good insulation I applied(double walls with polystyrene), fan tended to raise temperature above 38,5 celcius(every machine has an efficiency and some energy is lost to heat)so I had to make fan to stop when lamp turns off.
also the thermostat sensor should be on the inside of incubator,while thermostat itself outside so that you can watch on its screen if everything is fine.
I personally guarantee success above 85% if an incubator is built with the principles included in my last post.
also the thermostat sensor should be on the inside of incubator,while thermostat itself outside so that you can watch on its screen if everything is fine.
I personally guarantee success above 85% if an incubator is built with the principles included in my last post.