- Mar 23, 2011
- 24
- 0
- 22
Ok so I got this idea when I started to build my green house... so this is my idea I'll try to explain it. PLEASE GIVE FEED BACK!!!!!
this is the greenhouse frame and the inspiration.
this is the sketch I came up with.
What I want to do is... add supports along the center frames and build a 4' x 4' box for the coop area. Here's a look at that idea...
*sorry the pic is so bad I wish I knew how to make stuff like this on the computer*
Anyway ...
-The coop would have an open top and bottom for ventilation and could be replaced for the winter. The bottom would have wire mesh for easy cleaning, or more of a self cleaning system.
-The front would of course have the pop hole, and ramp. I want to try an auto door. I'm not good with mechanics and electronics so Ill have to recruit help.
-The back would have a storage area with the only access from outside the coop. This area would be about 18" deep and run the full 4'. Inside the coop would be the nest boxes. These will be built up on top of the storage area. I could fit up to 8 in there but I really think 4 would be sufficient. I'll leave something like a chill out area there. I will also add a few roost spots too.
In the end the whole thing will be covered by hardware cloth and toped off with a tarp that would cover the top and sides about half way down. To allow for shade and ventilation. The front will have a door for human access I will also add a door under the storage area as that is where I plan to hang the food and water. The wheels will be fitted on the back for easier maneuverability.
Well I hope I explained it well enough. Please pLeAsE PLEASE let me know what you think. Ask me questions give me suggestions. I feel like I've touched on all the basics but I know I've missed something.


What I want to do is... add supports along the center frames and build a 4' x 4' box for the coop area. Here's a look at that idea...

*sorry the pic is so bad I wish I knew how to make stuff like this on the computer*
Anyway ...
-The coop would have an open top and bottom for ventilation and could be replaced for the winter. The bottom would have wire mesh for easy cleaning, or more of a self cleaning system.
-The front would of course have the pop hole, and ramp. I want to try an auto door. I'm not good with mechanics and electronics so Ill have to recruit help.
-The back would have a storage area with the only access from outside the coop. This area would be about 18" deep and run the full 4'. Inside the coop would be the nest boxes. These will be built up on top of the storage area. I could fit up to 8 in there but I really think 4 would be sufficient. I'll leave something like a chill out area there. I will also add a few roost spots too.

In the end the whole thing will be covered by hardware cloth and toped off with a tarp that would cover the top and sides about half way down. To allow for shade and ventilation. The front will have a door for human access I will also add a door under the storage area as that is where I plan to hang the food and water. The wheels will be fitted on the back for easier maneuverability.
Well I hope I explained it well enough. Please pLeAsE PLEASE let me know what you think. Ask me questions give me suggestions. I feel like I've touched on all the basics but I know I've missed something.