Need help locating a user manual for an old incubator

[DMW8591]

Hi,
I am looking for a user manual for Sears and Roebuck model - 213.57 Incubator. I saw several old threads about the manuals... wondering if anyone has a copy they can provide?

Thank you so much and Happy Chicken Tending!!

 

[azurbanclucker]

Hi,
I am looking for a user manual for Sears and Roebuck model - 213.57 Incubator. I saw several old threads about the manuals... wondering if anyone has a copy they can provide?

Thank you so much and Happy Chicken Tending!!

Closest I can find after digging around the internet is

https://www.backyardchickens.com/th...-help-for-sale-and-wanted.639656/post-8607621

That's a model 228, not a 213, but you might look at it and see if at least the basics are similar. Finding parts or manuals for these old units is almost impossible anymore. No one is really making the parts, there's just not enough demand with modern incubators being easier to mass produce at lower pricing points for manufacturers.

Best of luck!

 

[DMW8591]

Thank you so much! My husband used this incubator years ago and had a good hatch rate. I purchased a newer incubator but we don't have as good results as this oldie goldie. Because of that we decided to revive this old incubator and use it.
Once again, thank you for your assistance.

 

[skeeterskip]

Hi,
I am looking for a user manual for Sears and Roebuck model - 213.57 Incubator. I saw several old threads about the manuals... wondering if anyone has a copy they can provide?

Thank you so much and Happy Chicken Tending!!

I have a users manual for a 213.57 Incubator 6 pages attached.

 

[bilbyforest]

I was looking for this manual too. Thank you.

 

[bilbyforest]

I have a users manual for a 213.57 Incubator 6 pages attached.

I was looking for this manual too. But I had to convert PNG to JPG using the online converter https://pdfguru.com/avif-to-jpg so that these images would open not only on my phone but also on my PC, with which, as it turns out, I have some minor issues. Such manuals are definitely worth saving. Thank you.

I wanted to thank you once again, as this weekend I finally figured out my incubator.