need help on incubator humidity and temp

tc62

In the Brooder
10 Years
Joined
Mar 9, 2009
Messages
28
Reaction score
0
Points
22
Location
leap of faith farm
OK Here goes I purchased a 9200 little giant, with a 6300 auto egg tuner,

with a 7200 air fan kit. I have the thermo that came with the tuner in side

the unit and a fake egg with hair gel with a probe in it for my wiggler.. The

therm probe has temp and humidity levels on it ( a

ACURITE digital w/probe) I have it hanging on the wall Should it be in the

incubator? The temp on the digital is 98.1 and 28% humidity. I have a

inside therm that is reading a steady 98 I have 31 eggs some are banty's ..

I put them in the bator on the 14th . Do I need to keep adding water in the reservoirs and how do I do it with the turner in the way??

NOW WHAT WAIT????
smile.png
 
Quote:
You need your temp to around 100 degrees.. (99.5) just try to maintain it close to 100 as possible.

The humidity.. 25 to 50.. for 18 days.. I had mine at 50 when the little ones just hatched

Keep an eye on your temp until the eggs get warmed up, because the temperture will fluctuate for awhile..

What I do on humidity... Is get a cup of warm water,, open my top a little and pour the water (NOT MUCH) in the middle of the egg turner.. I left one egg slot open..

Good luck
 
Quote:
I don't use a water wiggler but I thought the whole thing Accurite with probe needs to be in the incubator.
 
I use a straw stuck on the end of one of those bulb syringes that are used for irrigating ears to fill the slots in my LG. I put food coloring in the water when I first set the incubator up so I can see where to aim when I am adding more, I add through the windows so I don't have to open the incubator all the way. I don't have a probe type thermometer/hygrometer so I just set mine inside in one of the cups of the turner where I can see it, so I really don't know about how yours should be set up.
 
when you put the probe in the water wiggler, i know it checks the temp, but does it also check the humidity?
 
I don't think that it checks the humidity with the probe inside of a wiggler, it would have to sample the air inside the incubator and if it is enclosed in the wiggler I don't think it could. Are you sure that the humidity is measured with the same probe as the temperature?
 
Well I guess you were right I just put it in the bator and the temp is 99.0 and the humid is 51% .. I think we have a winner.. thanks

Temp is 99.5 humid is 51%
 
Last edited:

New posts New threads Active threads

Back
Top Bottom