pvc feeder not flowing

[newchicks5]

i used 3 inch pipe with 90 elbows ,its not free flowing ,help figure whats wrong.

 

[ChickenCanoe]

I find pellets flow better than crumbs.
It's not water so 90º may be too tight of a turn. Try 2 45s.

 

[newchicks5]

yes thats what iam thinking.i do use pellets.thanks

 

[PingoBags]

Have you looked at these http://www.homedepot.com/p/3-in-ABS-DWV-Hub-x-Hub-x-Hub-Wye-C5810HD3/100342323
You would just need to cap the bottom.

I had a small feed issue when I made mine with wood. I had to add a reducer to force the feed to where I wanted.

 

[RonP]

Have you looked at these http://www.homedepot.com/p/3-in-ABS-DWV-Hub-x-Hub-x-Hub-Wye-C5810HD3/100342323
You would just need to cap the bottom.

I had to add a 2" extender to stop them from flicking the feed out.

After than, 0 wast.

 

[newchicks5]

well i left the receipt in it so that doesn't help,

but its not free flowing, will change to a single feed,hope it works.