That looks pretty cool......but...I have not had much luck with 'painting' PVC, even the 'made for plastic' paints end up chipping/scratching off.So as i mentioned, my wife didn't want the part of the feeder that will be outside of the coop to be bright white and wanted me to try to make it look like wood. Here's the final results.
Nothing's better then building your own stuff. Looks great and your wife will be really happy when it's done. Win win!!Hi all, I've been lurking in the background and reading many many posts for a while now. I decided to go ahead and join and post updates on my coop construction in case any future first-timers (like me) might find this helpful. I hope thats okay. So big picture story before i get started. We moved a little bit out in the country a few years ago and my wife has been begging for chicken ever since. I've always said no. Then some friends got chickens a year ago. They don't take very good care of their chickens unfortunately, but my wife goes over almost every day to sit with them and take them snacks. They love her. They run up and crouch to be picked up every time they see her. So i caved. Plus, i really dig the design and construction process, so it's a win-win i guess. I am a big researcher and have been reading everything i can find about owning chickens, but that said, i am definitely a novice. If you see anything that's out of place or wrong, please let me know. The coop will be a 6x6 raised base. It will have a slant roof, 6.5 feet from the base on the high side. The nesting boxes will protrude from the one side. The plan is for 8 chickens. We will have a run as well, but i'll tackle that when this is done. My plan is to build it in pieces, starting with the base, and then doing each framed wall separately. That way I can do the construction in the garage and driveway rather than in the backyard. I can then carry all the pieces out to the yard to assemble when I am ready. I started with the base, which should be the heaviest part by far, but we should be able to manage it okay. So I cut the pieces that will form my base flooring for the coop. The coop will be big enough so that we can get inside to clean, so that’s why it’s not just a bunch of 2x4s. It will need to support our weight and the weight of the framed walls/roof. Oh, and the chickens (negligible).Next I added 18inch 4x6 posts in the corners. My neighbor had grape vines for years and gave me his old posts. They are awesome. Weathered, straight and in good condition. Oh, and free.
Legs on, I flipped the whole thing upright and added the framing at the bottom of the legs. The one side is open as chickens will be able to go under there to get out of the sun or rain, dust baths, run away from mean chickens, etc...
Finally, I cut the plywood to fit the top. I am not going to attach it however as Base + Plywood would be too heavy to carry all the way to the back. I’ll secure the ply as I assemble. The roll on top is vinyl flooring. I’ll put this down on the plywood as it will make coop cleanup easier down the road i hope.
More to come. I’ll be taking my time on this as we wont have chickens ready for the coop until April most likely.
Huh! Never heard that one.
Regular ole wood stain I had left over from another project. From what I read, it will fade some, but it won't chip off or peel, so it can be restained as needed down the road.
why OSB?this is what I have started I am going to do osb on wall and floor with a lift top
OSB doesn't usually hold up very well in the weather from what I've heard. Probably okay for the floor, if it wont be getting wet, but the walls might have issues sooner or later.
my thoughts exaclty.....I would be very careful about what I used osb for.
