The Hen-Want-Two-Be

[Aleisfood]

here she is my hen-want-to-be



the trays with fake egg sensor

the trays again from walmart

lights and fan one

water heater sensor mounted behind a channel. Which I ended up drilling out. also another fan blowing across it as well.



The see through top for lock down

one of 2 water trays



ok anybody got something to add that I may be over looking. Ive have two fans running mod the water heater sensor so its act with in a degree swing.
The egg tray are from walmart. The egg is filled with Flarp noise putty and sensor from temp meter then sealed with silcone and duct tape. I am a bite worried about temp and humidity gauge being right so atm there is a few extras till I feel comfortable with the hen-want-to-be. I had to add about 4 20 oz bottles of water for stablity. Plan on running the rig for the next 2 days to tweak her. Anything I am over looking?

 

[Aleisfood]

ok. over night run my temps are hanging around 100.6 and humidity is at 52 % Just tried drilling some holes in the top to regulate the extra heat.
I am afraid to try to adjust it on the water heater control for one degree adjustment. Is this the right aproach ?? help!

 

[Aleisfood]

The second night and we have the sensor change to a pill bottle and wet sand. Added a couple more jugs of sealed water for mass. added a couple more vent holes. Now we have swing of only 99.3 to 99.7 degree. gona let this set run over night to confirm but for the last three hours or more it seem to have stable out at this.

 

[Orphy]

wow! good job!