Water in Incubator

[Sdominique]

I have a Little Giant 9300 incubator with an automatic egg turner in it. Is there anyway to add water to the little trays in the bottom without taking the lid off? It's very difficult to see down past the egg turner trays to where the water slots are at.

 

[Kiki]

I am not sure, have you figured this out yet?

 

[oregonkat]

I have a Little Giant 9300 incubator with an automatic egg turner in it. Is there anyway to add water to the little trays in the bottom without taking the lid off? It's very difficult to see down past the egg turner trays to where the water slots are at.

I use a piece of 1/4inch tubing (you can use either aquarium tubing or irrigation tubing) and make it long enough to go through the grate and into the well of the channel. Send the other end either through one of the ventilation holes or make a hole for it in the incubator lid. Use a small syringe to put water in the tube. During lockdown, I just fill the syringe twice a day and squirt water into the well. That just tops it up, you may need to do this more or less often depending on your humidity levels.