2 channel timer for egg turner?

[wynn4578]

Correct me if I;m wrong here but I guess even if I had to add the manual switch I could still eliminate backfeeding with diodes.

 

[gpop1]

Correct me if I;m wrong here but I guess even if I had to add the manual switch I could still eliminate backfeeding with diodes.

diodes could be a option as long as they are over sized for the motor. Toggle switchs and buttons are also a option, just get a dpdt and cut the feed to the relays and supply feed to the buttons (manual/auto) then use button to activate the relays. Lots of ways this could work but really hard to plan until you have the timer in your hand and you get to play with it.

motor drive from the rear was the first option I was trying. Then when I got the turners installed I ended up lacking space at the back (also needed 2" to get under the bottom turning shelf and i forgot to leave that space open). so my plans changed. I still like the idea of not putting the motor and wiring in a real damp area but that's what happens when you design on the fly.

looking forwards to seeing how yours comes along.

 

[wynn4578]

Ditto. Can't wait to see yours whe it's finished. I'm having an amazingly hard time locating the right wine cooler fridge for this project. By next week I will have everything together except the fridge. The right one is out there it's just a matter of time until I find it.