memaw741
Hatching
- Feb 7, 2017
- 1
- 0
- 8
Looks great!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.

Top roost on right looks kinda too close to wall?I suppose it may be wise to update, yes? Heh.
We chose to do this with the roosts instead. Happy about it. Need to figure out something for that open wall in the back to add a little bit of rain protection, but we've got some time, I think.
![]()
Some pics of the "built-in" apron. We figured it would be more beneficial to pull the HC from the coop itself out on the ground. Trim will be going over the wood portions and the metal sections were screwed in with a washer to hold it in place.
![]()
Top roost on right looks kinda too close to wall?
Apron looks great!
I assume you will close that gap at top?
Oops.....creative, you got.We've had some really heavy rains today and I got a glimpse at just how horrible the dish pan nest box idea is on that back wall![]()
Gonna hafta get creative with something to put back there to keep the rain out. Ho hum.
Oops.....creative, you got.
FWIW, I built my nest boxes out of plywood, except I put wire bottoms in them. 1/2" x 1" welded wire. Hardware cloth would so the same. The wire bottoms drain and are easier to keep clean as any broken eggs, dust, etc. falls out the bottom. Fill them with a light fluffy material like hay or straw to cushion the eggs and they work fine.
I think this wide open car port coop idea is a good one for southern growers. We talk a lot about the Woods fresh air coop, but read his book and you find he had plans for something similar to this carport for southern states. It was made of wood, but the idea is pretty much the same.
Even in some norther areas, these could be outfitted with metal sides and one end enclosed. The single car versions, enclosed on three sides, presents the same air cushion potential as a Woods coop. It might even be a good quick and dirty alternative to the box store garden shed option?