I have been working on plans for the other half of my yard, the chicken side. I fear chicken math will take over. My garden more then doubled, chickens next. I so love those adorable silkies. There are so many references to Silkies as pets. I have so much work to do right now, the irrigation system is really a problem. Emotionally I am resisting the design given me, the designer in me tells me there is another way.
When I was in the field inspecting work, I was always surprised at different ways the same job with the same results could be done. That was what was important. I worked from the aspect, the contractors were professionals, observe and evaluate, do not tell them how to do their job. I was more interested in not cutting corners.
Nearly 20yrs ago, I was the lead for a landscape crew. I did all the irrigation install. It's possible I could help. Pics or drawings or questions?
I wish it was Possable. I did a number of systems. I used to know the flow/waster pressure/ dia of line all that stuff. Every thing was in my reference book, notes and formulas.
My problem is I have to drill holes in PVC pipe, I was told to get both 200psi and schedule 40 3/4" pipe. I got it. Now I have to make a jig, draw 3 lines @ center, 45deg both sides full length of each 10' section. Next mark every 1/2". Lastly I then drill holes with a #57 wire drill bet. That is about 360 holes, I have 30' each bed, 9 beds, 270'. A #57 wire bet is very small and I have only 1 wire bet. That is 97,200 holes. I disagree on the 200psi pipe, I am not sure about water pressure, ... You know what I am getting at, and I think that this is not time cost effective, or a negative return. Steve believes that LDS PREPPER has everything covered. Well he is always fine tuning, and for him it works. When I put the top on my T-frame I told Steve I needed a center brace. No, that was not what LDS did. Then when LDS put the shade covering on he had a center brace. Steve designs web sites and advertising. He told me he doesn't understand what I am talking about.
I've been weighing wither or not I want to deal with him being angry at me to redesigning the wheel. Clearly the hoses do not work in proper watering. I have an idea. I may set up an experiment to see if it works.
I ran a fowl of a civil engineer design once before, and he know what he was doing. I was working the week end to finish the project, the engineer I usually work with just let me do things if i couldn't ask him at the time. Will, I saw 2 things, I could save 600' of 12" pipe and trench by rerouting to a collection drain, increase the size of the out let pipe. Then I saw were I could dig one trench a little deeper, put in water line under the electric with proper separation. My boss was thrilled. I saved money both revisions. The project engineer was complimented on the improvements. But he was insulted a mere civil cad operator should change anything and in a rage at me. The next day the guy up I usually worked with asked me if I mind doing his job. I told him not at all, after all he checks my works, signs off on it and it is his butt that is in a sling not mine. He said he could live with that.

