My pipped chick is pushing another piece of shell up and down trying to push it off - so exciting!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
That is what I have been following.That is what the hatching 101 article says to do. Take them out and lay them down with the lowest dip in the air cell facing up.
I will try my next batch that way and see what happens.Like I stated, several very experienced breeders used to think the same way. But are now keeping them upright.
I've never heard any of that about using a glass of water. That doesn't seem right to me at all. Thermometers are to measure the air temp. At egg level the goal is 99.5. If putting it in water is making the air temp 106 it would fry the eggsYou don't always get pictures of chickens when you do a search for sex link chick.I had one silkie egg that was supposed to hatch Friday, nothing yet. I have Silver Laced Wyandottes that were supposed to hatch today, nothing. I get 2 of them and they are still moving inside. Mytemps have been crazy. I have been checking everything. I finally moved the ones I was sure were still alive on day 17 to a different incubator that has been holding it's temp steady for 2 days. As soon as I took them out the temp stablized in the incubator they were in. The questionable ones are still in there. Just to quadruple check my temp/humidity guages, I put a themometer in the glass of water inthe incubator. It was an empty one. The temp was 106' but in the glass it was 99.6'. I have read that it's more accurate to take a reading in water (or is it the wet bulb temp I should be looking for) but I am nervous about leaving it that high. the humidity was 70. My temp always jumps 8 degrees when the water dries up. Help, again, please.![]()
![]()
Also - I have had no rocking prior to the pipping - is that weird?