Sorry. My message is hidden in the quote lol
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I'm not sure what you read that I said different? I read your article and other than being long it said 25% and the end of hatch up to 60%...I have a dropped and if the humidity drops below 25% I add a dropper of water
Bring the humidity level in the room up to between 50%-75% preferably 50%. If you live in a humid environment, you may actually need to dehumidify your room. But nevertheless, if you keep the humidity at 50% or close to it, you will do great. By controlling the room humidity, you can be more precise with your moisture in the incubator especially the foam incubator's. Since your incubator gets its air from the room, it will have some humidity. If the humidity in the room drops to 40% don't get concerned. The eggs themselves will supply some of the humidity needed inside the foam incubator's. On day 7 while you have the incubator opened, check the humidity inside the incubator. In foam incubators, add a teaspoon or two of water if the humidity is real low. Low being 25%. On large fowl eggs we have found that the lower humidity levels, say 25% are fine for them for 24-36 hours. We like to hatch at about 65-70% humidity in the redwood.
You begin by ONLY adding a small amount of water and keep Humidity between 28%-45% and adjusting as you weigh or candle depending on moisture loss. So if your air cells look too large you must add humidity, too small lower it, and if your weighing you adjust as needed. UNTIL DAY 18 LOCKDOWN,
then stop turning and raise humidity to 65-70%
Urgent:
Can you incubate a double Yoker?
Here is a pic of it in my hand!:
![]()