Automatic horse waterer

cboriskin

Songster
8 Years
Joined
Nov 5, 2011
Messages
104
Reaction score
2
Points
129
Has anyone used an automatic horse waterer? It's a small bowl, often use for horses and other livestock, hooked up by a hose and directly to a spigot. It will take more pressure than the nipples and/or cups. I am still trying to find a way to hook up directly to the spigot. Here is a link to what I am talking about:

http://www.tractorsupply.com/little-giant-reg-automatic-waterer-5051250
 
Those are hard mounted to a wall or post and the way chickens are with getting their water dirty they are to hard to clean.

frow.gif
 
The ones they use at the ranch I board my horse at, are cleaned with a sponge periodically. It really isn't a big deal. I was going to attach it to one of the 4X4 legs that my coop stands on. I would use the beakcup, but they use low water pressure. Looking to hook directly to the spigot without the expensive regulator. How do you clean the beakcups?
 
I have a poulty and fowl waterer that I like made by Little Giant - however - I do have cracked hoses with the freezing weather.
 
Something to think about, definately. It's a good thing I live in Sacramento, CA where freezing temperatures are not usually a problem. However, maybe putting those pipe insulations around the hose?

In my coop, I have installed a Little Giant automatic bowl waterer that operates by gravity. I used pvc pipes and hooked it up directly to the spigot and it works great. I do clean it once a week. I could use another one for their run, but because the bowl is so big (even though it's the smallest you can buy), I thought being outside, it would get dirty too quickly.
 
Last edited:
Ok, scrapped the horse waterer and just got the Little Giant poultry bowl waterer like the one I'm using inside the coop. It was actually smaller. I know it works hooked up directly to the spigot, so I'm done making decisions how to do the watering system. I think I'm actually done with my coop. Pictures to follow.
 

New posts New threads Active threads

Back
Top Bottom