Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I do understand the dry incubation method may be different for diff. climates. I'm running a DIY cabinet with circ. air and in the summer if I didn't have my humidifier on it was down about 23% which I believe is too low even for the dry method. I'm just saying I can mimick the humidity level of wherever someone resides and the best hatch rate is what I'm aiming for. I guess it also depends on if an incubator has circ. air or not and how much circulation.I dry incubate all my eggs. you have to find what works for you. many things can change how you incubate. type of bator your location (very humid here most of the time) but your hatches will tell you what they like. my bator runs from 40% down in the summer. if it gets higher I have to do something to get the humidity down.
Thanks Wynette, I also do the weight loss, I chose 4 eggs and avg the loss. Do different breeds require different loss% ? I really don't understand when ppl say it all depends on climate or altitude. as for climate if my incubator is reading 40% here in British Colombia it should be exactly the same if it was reading 40% in Florida. I have a humidifier hooked up to my controller so I can keep the humidity steady, I usually have a 2% on/off.
Quote: It is said that the "halo effect" is from the Wheaten influence. It's a lengthy story, but essentially, the breed wasn't split out by color (Black Copper and Wheaten) back in France, due to the males being very similar phenotypically (in how they phsycially look). So, the "original" flocks had a mix of Black Copper & Wheaten in them whent hey were shipped to the U.S. Breeders here have been working to separate them since then. We use the term, "wheaten influence" when we are speaking of Black Coppers that have traits that they should not have, and may be there from the influence of the wheaten blood that was in them long ago.
By color balance, I mean the color of the hackles and saddles - they should ideally be exactly the same. That's tough to get in a bird, but we look for them to be as close as possible. When is say "good color balance" I am saying that the hackles & saddles are very close to the same color.
You are spot on in your asessment of his shape.
If he is what you have, then by all means, use him! Pair him with females that that nice, rounded underline per the SOP. Make sure their tail angles are correct. I do like this male's topline; the angle is very good, not perfect but quite close, and his back is nice & long.
Heck I got hatching eggs from france a few years back and many of the resulting chics didnt look like they french standard....but we did keep some nice birds from that hatching as well.What I mean to say (sorry I didn't explain very well) is that humidity loss will be different depending on your altitude, among other things. You are correct in that they should lose the same percentage of moisture regardless of breed, regardless of altitude. So, if you're using that method, you shoudl be spot on. BEST of luck - hope it's a most awesome hatch!
It is said that the "halo effect" is from the Wheaten influence. It's a lengthy story, but essentially, the breed wasn't split out by color (Black Copper and Wheaten) back in France, due to the males being very similar phenotypically (in how they phsycially look). So, the "original" flocks had a mix of Black Copper & Wheaten in them whent hey were shipped to the U.S. Breeders here have been working to separate them since then. We use the term, "wheaten influence" when we are speaking of Black Coppers that have traits that they should not have, and may be there from the influence of the wheaten blood that was in them long ago.
By color balance, I mean the color of the hackles and saddles - they should ideally be exactly the same. That's tough to get in a bird, but we look for them to be as close as possible. When is say "good color balance" I am saying that the hackles & saddles are very close to the same color.
You are spot on in your asessment of his shape.
If he is what you have, then by all means, use him! Pair him with females that that nice, rounded underline per the SOP. Make sure their tail angles are correct. I do like this male's topline; the angle is very good, not perfect but quite close, and his back is nice & long.
Heck I got hatching eggs from france a few years back and many of the resulting chics didnt look like they french standard....but we did keep some nice birds from that hatching as well.
Would it be possible to see a photo of the BC female behind the male? I would not be afraid to use this male if he is what you have. I would like the Hackle to be more Copper but could live with this to start with. If you want to improve the Hackle color try and find a male with the more Mahogany color. This male shows good type.
REALLY? ? ?![]()
and how did you get the eggs from France?
![]()
YES REALLY ! !! My cousin was stationed at various bases throughout Europe. He and his wife were chicken lovers as well,REALLY? ? ?![]()
and how did you get the eggs from France?![]()