Brooding chicks outside in winter

I do brood outside in winter, but I do not use my heat plate to do so because the one I have is not rated for those temperatures. My heat plate is for the indoor brooding of those that need a little extra TLC or, the first day or two after shipped chicks arrived so I can make sure everybody is doing well, or, this year, the first few days after hatch for the eggs I am incubating. I do use it outdoors when I'm not doing winter chicks go to for those cold winter broods is the mama heat pad...
 
So looking at your pictures you don't bother with wrapping in towels and using cling wrap? I'm reading that in the original post about it and it's confusing how she did it.
Maybe I am replying to the wrong person @debid
I have Press & Seal on the diaper piece. I wrap it around before stitching it to the heating pad cover.
I did mine so the framework fits inside the heating pad cover. There is a rectangular piece of hardware cloth about the size of the pad and then a couple pieces of stout wire harvested from broken tomato cages in a big X shape to make the legs. I have some little wire hooks on the fencing piece that clip onto the X sandwiching the pad itself in between. It's hard to explain without pictures and it's in use now so I can't disassemble to show you. But, the concept was to have only the wire legs exposed, they fit through tiny holes in the corners. Everything else structural is inside that cover, and all the sides are lifted enough that the chicks can pop right through in any direction if needed.
 
I do use my brooder plate outside. I put it inside a cardboard box facing away from any drafts, and it works perfectly. I've never had it fail below 50 degrees.

I put the chicks out as soon as they have all hatched.
 
Brooding outdoors with a Mama Heating Pad is the way to go! I used one of these off Amazon (https://a.co/d/06qy3jZ0) and secured a large heating pad to it. Just make sure you buy a heating pad that doesnt have an auto shutoff

I do use my brooder plate outside. I put it inside a cardboard box facing away from any drafts, and it works perfectly. I've never had it fail below 50 degrees.

I put the chicks out as soon as they have all hatched.
Interesting. I use a brooder plate but it specifically states that the ambient temperature should not fall below 60F.
Do you put any insulating material around it?
 
My son has been doing it in a coop setting. Problem has been when power went out and much occurred when ambient was about 0F. I do chicks under broody hens in a manger setting without troubles although keeping them in fresh liquid water is a difficult deal.
 

New posts New threads Active threads

Back
Top Bottom