- Jul 26, 2009
- 187
- 22
- 128
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I did this 2 days ago and I only changed the water twice, not dirty at all! Thanks.
In this video of happy sand bathing quail, you will the the drinkers I use for all of my quail 14 days old and older. ZERO drips, ZERO mess, and easy to refill by unscrewing the top. Also shown is my no waste quail feeder bottle.I got my Coturnix a 2 days ago and I already washed the waterer 17 times (yes I counted...). Does anyone know a better waterer design of something that will be clean for a longer amount of time? I don't like the idea of nipples, doesn't seem like they were made to drink from them... Any help is appreciated.
- for your feeder I assume you use one of those right angle PVC coupler. Can you please tell me what size is appropriate for quails? Did you use a 1 inch? 2 inches? I'm designing an auto feeder using similar concept but not sure what size PVC is right.In this video of happy sand bathing quail, you will the the drinkers I use for all of my quail 14 days old and older. ZERO drips, ZERO mess, and easy to refill by unscrewing the top. Also shown is my no waste quail feeder bottle.
Yes, it's a 90 degree. For the jumbo brown coturnix quail I use a 1 1/2 inch (it has to be small enough so they can't get in past their "shoulders"), I shorten (cut) the inside part and cut several notches in it on the bottom to allow the feed to flow in a shallow layer. I also notch all around the port to seat a seal so I can keep the port from dislodging from the bottle. If you make one, be sure to secure the bottle so it can't tip over or use a large flat bottom container that your birds can't move around.- for your feeder I assume you use one of those right angle PVC coupler. Can you please tell me what size is appropriate for quails? Did you use a 1 inch? 2 inches? I'm designing an auto feeder using similar concept but not sure what size PVC is right.
- Can you show a close up picture of your waterer?
Thanks. I just switch to a nipple on end of a water bottle upside down. The birds get clean water all day. I don't think I'll go back.
Sure. It turns downward into the bottle as you can see. You have to cut it so it's not too long, of course. Otherwise it's too far of a reach for the quail. If you feed your quail pelleted game-bird feed instead of crumbles, make the notches on the bottom higher. It takes some work to build, but once it's done it's less maintenance and wasted feed.![]()
It's a horizontal nipple. Waaaaaaay better than the vertical. It's spring loaded so no dripping.Thank you for the photos. I saw similar design for chickens and liked it but wasn't sure what size to get for quails. You've saved me a lot of time tinkering, especially with the bottom notch. Didn't know you needed it.
What type of nipple are you using for the waterer? I assume that red thing is a nipple but haven't seen that type before. My birds are drinking from the standard chicken nipples just fine, but I'm curious about your set up.