Designed a new incubator humidifer

Ken H

Songster
10 Years
May 21, 2009
152
0
109
I have planed and started to build a humidifier for the incubator I made yesterday. Have already cut the metal from 26 ga. sheet meatel. Now all I have to do is solder it's seams. Testing will be performed this weekend. Filling will be accomplished through a vinel hose running to the outside of the incubator so it won't have to be opened to fill the pan. Here's a very rough drawing of the humidifier.

 

walkswithdog

Crowing
11 Years
Jul 17, 2008
4,639
44
276
DC Region
Be reallllyyyyy easy with that kind of surface area and location near the heat source to jack the humidity too high.

But kudos for engineering your own!!! Wish I could weld and fabricate parts. Not there yet, I'm still basic salvage and convert.
 

Ken H

Songster
10 Years
May 21, 2009
152
0
109
I concidered that problem. A cover will be added with a captive threaded rod going to outside the incubator. Rotate the rod one way to open ,the other way to close.
 

New posts New threads Active threads

Top Bottom