DIY CABINET COOLER INCUBATOR How we did it and TEST RUN Ready Set GO!

we calibrated all of them you see in the images and I think I posted what I use? accurites and some probe types, calibrate them in a ziplock with salt that is damp... see the calibration temps humidity section of 101 article.
 
we calibrated all of them you see in the images and I think I posted what I use? accurites and some probe types, calibrate them in a ziplock with salt that is damp... see the calibration temps humidity section of 101 article.
Okay, thanks.


I purchased a digital thermostat on Ebay today.
 
Last edited:
That is extremely awesome! Thank you for taking the time to document your entire efforts. That was very informing.
wink.png
your very welcome! let me know if you make one!
 
Day 14 Candle!

Every egg looks great! (these have been in the new cooler since the start! YAY) didnt have to pull any, and with the new 3000 lums flashlight I can see in EVERY EGG!!! FINALLY!!

I DID add a dish and sponge up top for humidity as air cells are growing larger with the less humidity/snow on the ground here! only small patches of snow/ice remain on the side of the drive!! YIPPY!!!!


 

New posts New threads Active threads

Back
Top Bottom