DIY Incubator Help!!!

[NickGT]

Hello, I am in the process of building a incubator to hatch more eggs. I am using a dishwasher for this. I am having trouble on all the parts I need. Ive looked at the kits from incubator warehouse, is this a good product, if not what are some recommendations for a kit that has like a fan and temperature gauge for everything that I need i.e (heating element, fan, temperature control). Something that isn't to complicated. Thanks for any help.

 

[ChickenCanoe]

I had 3 of those incubator warehouse kits that are thermostat, fan and heater in one. I loved how they were set up but ruined 3 hatches with them because either the heat failed or the controller went haywire. It would be great if they worked and didn't fail but I'll never trust one again. They are about as reliable as a Little Giant incubator - which isn't reliable at all.
I'm not aware of another preassembled kit like it.
About the simplest and most reliable is to get a STC-1000 available from e-bay and amazon.
https://usefulldata.com/temperature-controller-mh1210w-review-manual-instructions/Another option that I haven't used is a https://usefulldata.com/temperature-controller-mh1210w-review-manual-instructions/
You'll need to have a heat element and fan.
I highly recommend a metallic heat element. This one should work for something the size of a dishwasher.
https://incubatorwarehouse.com/cata...P277r3eQL4665bfuy5zupzPqf5EfLdSxoCaCIQAvD_BwEDon't go for the smallest fan. I recommend a more robust computer fan but also don't go with the most powerful or you'll need a bigger power supply.
You'll also have to figure out where and how to place holes for ventilation introducing fresh air.