DIY Thread - Let's see your "Inventions".

[Paganrose]

Posting to subscribe! I love this thread.

I am starting over with day old chicks after taking a break due to coon devastation a little over a year ago. Redoing the coop layout and predator proofing better. I have gotten so many good Ideas from you people! I will post pics when I get around to it. hopefully I will have a few mild weekends in the next couple of months!

 

[bruceha2000]

Posting to subscribe! I love this thread.

I am starting over with day old chicks after taking a break due to coon devastation a little over a year ago. Redoing the coop layout and predator proofing better. I have gotten so many good Ideas from you people! I will post pics when I get around to it. hopefully I will have a few mild weekends in the next couple of months!

Have you looked at this thread?

https://www.backyardchickens.com/t/956958/mama-heating-pad-in-the-brooder-picture-heavy-update

superior way to raise chicks when you don't have a broody hen

 

[COChix]

Have you looked at this thread?

https://www.backyardchickens.com/t/956958/mama-heating-pad-in-the-brooder-picture-heavy-update

superior way to raise chicks when you don't have a broody hen

X2 will never use another heat lamp again after using this system last year.

 

[pederslilfarm]

Automatic waterer And an important step... toad proof the toilet valve.

 

[perchie.girl]

Quote:
I have always loved this one......

 

[KDK1]

I have always loved this one......

I have three now... all three still going strong. I had to replace the valve in the first on though but it was a used valve to begin with.

 

[LeslieDJoyce]

Double Evaluation Cage

I built a bunch of Bottomless Fold-Flat Evaluation Cages to help with making breeding choices. There is a lot of info online about building chicken coops, but not a lot about building chicken cages. I found some really great bunny cage tutorials, but nothing with a Pop-Up design, so that's the part I had to figure out.

Materials:
14 gauge Cage Wire
16 gauge Spool Wire
J-Clips
J-Clip Pliers
Needle Nose Pliers
Flat Pliers
Wire Cutters
Zip-ties for when in use
Common Sense

Folded Flat for easy storage




Cage at about half-mast



Cage fully upright




Detail of the cage latch, made from 16 gauge wire




Left door open




Inside Left compartment





The cage shown above measures 4' x 2' x 2' when fully upright. It has two 2' compartments. It is bottomless. You don't need a lot of J-Clips everywhere if you're just using the cage as a temporary evaluation cage, but you do if you intend to keep birds in them.

The trick to making the cage fold flat as shown in the first photo is to only attach the front (door) panel across the top edge of the cage, to only attach the side pieces to the back of the cage, and to only attach the divider to the top of the cage. When the cage is upright, use zip-ties to attach the side panels to the front panel, and to secure the divider to both the front and the back.

Some tips:

1) Paint the cage matt black for less visual clutter -- this will help you see your birds instead of the cage
2) Use a Dremel tool to cut the wire
3) If you want to add a bottom, use plastic coated wire in a smaller mesh size to be kinder to the birds' feet
4) If you're using the cage to train show birds, cover the inside of the wire with something like plastic or plexiglass to protect the tail feathers and combs.
5) Before assembly, stack the cut pieces under weighted plywood to help straighten them ... the straighter they are, the easier they are to assemble. I walk on them to straighten them, but even so the press makes them straighter.
6) If you intend to use the cage overnight, be sure it is in a predator-proof area, or wrap the cage in 1/2" hardware cloth.
7) The cages are pretty light, so if your birds are strong and flighty, put a weight on the top. You could also attach them to a table, shelf, etc.
8) Use good tools. I've read reports of the cheaper J-Clip Pliers bending out of shape after a couple squeezes. Also, not all "wire cutters" will handle the 14 gauge wire.
9) The cage wire comes in different heights, lengths, mesh sizes and gauges. Think about the size of your birds when choosing your wire and your dimensions.
10) 14 gauge wire seems sturdy enough to stand up on its own.

 

[RJSorensen]

Thank you so much for this!

RJ

 

[bruceha2000]

Nice Leslie!!!

Hi

 

[perchie.girl]

Double Evaluation Cage

I built a bunch of Bottomless Fold-Flat Evaluation Cages to help with making breeding choices. There is a lot of info online about building chicken coops, but not a lot about building chicken cages. I found some really great bunny cage tutorials, but nothing with a Pop-Up design, so that's the part I had to figure out.

Materials:
14 gauge Cage Wire
16 gauge Spool Wire
J-Clips
J-Clip Pliers
Needle Nose Pliers
Flat Pliers
Wire Cutters
Zip-ties for when in use
Common Sense

best of the list of materials

This kind of construction can also be done for Transport cages. With a bottom of course.

I used a similar idea for a temporary cage With all the same materials but they were all steel. For the bottom rather than having them walk on 1/2 x 1 galvanized i just bought the plastic mesh hardware cloth and cut a piece for the inside floor.... and set it inside.

deb

deb