Duck egg

[Bourne88]

10 days there’s a black dot moving but can’t see veins or blood ring will it be okay

 

[Pyxis]

Unfortunately it has quit At ten days a live egg would have lots of veining.

 

[KaleDaDuck]

10 days there’s a black dot moving but can’t see veins or blood ring will it be okay

No that is not okay.. A single dot without veins means that it quit... Make sure your temperature is at 37.812 and humidity at 56% for the best hatching rates an automatic turning tray would be the best...

 

[Pyxis]

No that is not okay.. A single dot without veins means that it quit... Make sure your temperature is at 37.812 and humidity at 56% for the best hatching rates an automatic turning tray would be the best...

That temperature would actually be a little high, if the incubator is forced air In forced air, you want the temp to be 37.5. In a still air, you actually want it higher, about 38.6.

Humidity will also vary from location to location. For my location, 30% is best and if I tried 56%, all my ducklings would drown in the shell. There's really no one correct humidity, unlike with temperature. Instead, it's best to track air cell growth or weight the eggs to monitor moisture loss and adjust humidity as needed, until you know what humidity is going to work best for your specific area.

 

[Fluffyflufffluff]

10 days there’s a black dot moving but can’t see veins or blood ring will it be okay

That doesn't look good. it has to have a lot of veins showing already. I haven't experienced that yet.