awwwwwSome gosling pictures
thats crazy, you would think a janitor at a hospital would know better(At the hospital once a janitor unplugged one of the instruments running overnight so he could clean the floors using that plug. Delayed patient results and > $3,000 of test reagents down the drain.)
Got more done this morning.
Now heading out for errands and work. Have a great day, all!!!
Quote: Pretty good. Woke up this morning, so that's encouraging.
Y'all getting along o.k?
Pretty good. Woke up this morning, so that's encouraging.
Y'all getting along o.k?
Congrats on the broody hatch. Nice job with the incubator!Morning All,
Got a final count on the broody last night. 10 out of 12. She had kicked the last 2 eggs to the front of the kennel so I'm assuming she's done with them.
Also think I found a fix for circulation in the bator. Managed to get readings within .5* F top to bottom which seems decent. Alot better than the 30* variance I had top to bottom previuosly. Original fans just weren't able to move enough air. This one is 3 speed and was moving too much air on high, dialed it back and on low it seems about right.
I know it's too hot, wafer is wired in but not set yet. Actually doesnt even have the wafer in it, just the bracket and switch.
Also, Happy Birthday @MotorcycleChick Hope you have a wonderful day.
DawwwwwwwSome gosling pictures
Quote: Good to hear. I think I had posted this before, but I had a really bad bad sprain that took a long time to heal. I did my rehab by hiking with poles 9had never used them before) - the hiking (over rocky terrain) made sure I got my proprioception back, and the poles were a huge help in confidence and balance. They do take a bit to get used to, but you'll get the hang of them - if you're able, do a few day hikes on rough terrain with them before hand to get the hang of it. Definitely a good thing to have.
Ugh, the janitor at the school unplugged my incubator yesterday afternoon and did not plug it back in.
They were unplugged roughly around 3:30pm, and my daughter went in to check water levels before school and noticed it was cold around 7:30 this morning. Ugh - 16 hours. I know it's possible they survived, hoping for the best. Going to go up and check for movement tonight after work.
(At the hospital once a janitor unplugged one of the instruments running overnight so he could clean the floors using that plug. Delayed patient results and > $3,000 of test reagents down the drain.)
Unbelievable, you'd think they would know better.
Morning All,
Got a final count on the broody last night. 10 out of 12. She had kicked the last 2 eggs to the front of the kennel so I'm assuming she's done with them.
Also think I found a fix for circulation in the bator. Managed to get readings within .5* F top to bottom which seems decent. Alot better than the 30* variance I had top to bottom previuosly. Original fans just weren't able to move enough air. This one is 3 speed and was moving too much air on high, dialed it back and on low it seems about right.
I know it's too hot, wafer is wired in but not set yet. Actually doesnt even have the wafer in it, just the bracket and switch.
Also, Happy Birthday @MotorcycleChick Hope you have a wonderful day.
Hmm, let me think on it. Nope that's a bit under budget. I plan to do a full write up on it soon but current cost is in the neighborhood of $150. Goal was under $100 but stuff adds up quick and I haven't started on the turner. Display cooler was free off craigslist.Morning All, Got a final count on the broody last night. 10 out of 12. She had kicked the last 2 eggs to the front of the kennel so I'm assuming she's done with them. Also think I found a fix for circulation in the bator. Managed to get readings within .5* F top to bottom which seems decent. Alot better than the 30* variance I had top to bottom previuosly. Original fans just weren't able to move enough air. This one is 3 speed and was moving too much air on high, dialed it back and on low it seems about right.
I know it's too hot, wafer is wired in but not set yet. Actually doesnt even have the wafer in it, just the bracket and switch. Also, Happy Birthday [@=/u/136105/MotorcycleChick]@MotorcycleChick[/@] Hope you have a wonderful day.
How much do you want for it?! I think I got $35 dollars in my wallet. Is that enough?!
That's still less than a small styrofoam incubator...
