- Feb 3, 2011
- 8
- 0
- 7
Howdy all, We love our birds so much and we figure they deserve a new chicken coop! With more planning this time, I'm actually going to integrate all sorts of technologies into this coop build.
The frame:
It's a 3x3 frame with the floor elevated off the ground. The roof is just a slant from the front to the back and over hangs a bit. I'm not sure what I'm going to mount on for the actual roof yet... maybe metal, maybe painted ply-wood, or maybe that plastic roofing stuff at the box-stores? The main this is, I'm going to mount a solar panel to it.
The door:
There are two aluminum channels for a piece of sheet metal to slide up and down. The door will be raised and lowered by wire, a pulley, and a car automatic/power antenna motor. It will be opened in the morning and closed just after sunset by a micro-controller. I will post more details on this later so that you can take my code and replicate it easily.
Heating/cooling:
I've got a 12v heater and I might program the micro-controller to turn it on for a little while if it gets cold inside the coop. For cooling, I might hook up a fan to turn on at night if it's one of those ridiculously hot nights.
Water catchment:
I might install a small gutter so my girls can drink pure rain water... any thoughts on this?
Internals/other:
One nest box because our 3 birds just love to share a nest. Any thoughts on nest box design? I've heard if you make it really really small, they never poop in there. I'm going to mount some large branches in the inside for them to perch on. One complete side is going to be a hinged door so that we can have easy access to clean the whole thing. Any thoughts on painting the inside to make poop-washing easier? I figure we will use hay or something to dry the poop so we don't have to clean it out often.
All comments welcome!
Frame

Floor installed

Construction delayed!

The frame:
It's a 3x3 frame with the floor elevated off the ground. The roof is just a slant from the front to the back and over hangs a bit. I'm not sure what I'm going to mount on for the actual roof yet... maybe metal, maybe painted ply-wood, or maybe that plastic roofing stuff at the box-stores? The main this is, I'm going to mount a solar panel to it.
The door:
There are two aluminum channels for a piece of sheet metal to slide up and down. The door will be raised and lowered by wire, a pulley, and a car automatic/power antenna motor. It will be opened in the morning and closed just after sunset by a micro-controller. I will post more details on this later so that you can take my code and replicate it easily.
Heating/cooling:
I've got a 12v heater and I might program the micro-controller to turn it on for a little while if it gets cold inside the coop. For cooling, I might hook up a fan to turn on at night if it's one of those ridiculously hot nights.
Water catchment:
I might install a small gutter so my girls can drink pure rain water... any thoughts on this?
Internals/other:
One nest box because our 3 birds just love to share a nest. Any thoughts on nest box design? I've heard if you make it really really small, they never poop in there. I'm going to mount some large branches in the inside for them to perch on. One complete side is going to be a hinged door so that we can have easy access to clean the whole thing. Any thoughts on painting the inside to make poop-washing easier? I figure we will use hay or something to dry the poop so we don't have to clean it out often.
All comments welcome!
Frame

Floor installed

Construction delayed!

Last edited: