Facing issues from start.. kindly help.

It would help to know what incubator you are using but the simplest solution is to put in less water. Humidity is effected by the surface area on the water, a wider container with water has more surface area than a cup for example so the wider container will make your humidity go higher. I use a recycled yogurt cup for my humidity the first 18 days and then switch to several sponges on a plate for lock down in my home made incubator.
 
Newly born chicks.
IMG_20170712_034228275.jpg
 
It would help to know what incubator you are using but the simplest solution is to put in less water. Humidity is effected by the surface area on the water, a wider container with water has more surface area than a cup for example so the wider container will make your humidity go higher. I use a recycled yogurt cup for my humidity the first 18 days and then switch to several sponges on a plate for lock down in my home made incubator.
Will surely try this this week end.
 
Why is my eggs taking more time to hatch.
Some eggs hatch at 20-21 but today is 22 and still some eggs are in hatching phase.
 
Why is my eggs taking more time to hatch.
Some eggs hatch at 20-21 but today is 22 and still some eggs are in hatching face.

Do you have a picture of your incubator? Are there cool spots? Cooler temps will slow down chick development a little. It's not too unusual to have chicks hatch a few days apart though.
 
Why is my eggs taking more time to hatch.
Some eggs hatch at 20-21 but today is 22 and still some eggs are in hatching phase.
I am from india, it's hot here room temp is 32-33c.
Incubators temp is maintained at 37.5c
I have seen condensation in the lid. I used to put a cloth over it to avoid formation of moisture.
In that case,
How to reduce the humidity in the starting days?
fill less tanks with water. Humidity comes from evaporation and more surface area equals more evaporation.

Some incubators have a humidity setting and a auto humidity feature.
What is your incubator?
 

New posts New threads Active threads

Back
Top Bottom