I did the vertical one. I did not glue it because wanted to be able to take it apart to adjust it and to clean it really well. I honestly have no idea what went wrong, as I tried multiple "tops" (screw in top first, then a cap that fit over the PVC). I even tried putting a plastic bag over the top to keep it from leaking. After all that (and cleaning out the nasty mess each time + wasted feed), I realized it was just not working out for me and gave up trying to solve it. Maybe it would work better if it was placed inside a coop/shed, vs in the run like I had it.Did you glue the pieces together? A lot of people do demonstrate how to build the PVC feeder, glue the parts. Did you try the horizonal or vertical feeder? I could see how the horizontal ones would accumulate moisture since they're open. Not sure how the vertical ones would though.
With 14 hens, I have 2 bowls (12C size) that I fill up 2/3 of the way every other day or so. It's not automated, but I check on them every day anyway (usually 2-3 times a day), so it's not a lot of work to pour in more feed when I'm out there. I transfer feed into gallon-size jugs that I keep in the coop instead of all 50lbs of feed.I'm really surprised this doesn't attract rodents. So you just leave the bowl of food out all the time? How often do you find you have to refill the bowl? I'm trying to make my system as automated as possible, if I can.
Yes, as long as you do the hardware skirt - either as he has in the plan or dig it down into a trench.Thank you SO much for letting me know that this coop plan doesn't have room for a critter to get in. I was wondering about that. Do you think it's because it's pretty much fully enclosed in hardware cloth?
Saw some odd looking holes in the ground by the cinder block base, that looked like could be rodent tunnels. And feed was disappearing faster than it should. So bought a couple of traps and confirmed! I had a family of 4 in there living the good life. They must have made a nest before I closed it up with the HWC.I'd love to hear how you figured it out??