French frogs

[Sally Sunshine]

Get you a belt sander. Use 100 grit. Then follow with orbital sander. Use 120 or 150 grit.

I mess with woodworking a little. Allot of the pallet lumber is very hard wood.

pallets rip those belts up and send them up over the mountain! what kind of belt sander do you use I want one if it works! I tried everything, only thing I found that I have is a wheel with wire brush and then down to grits and then I can sand with my sander. I saw on one of the AK shows I watch they used a hand planer that was kicken butt! but of course on pine

 

[Tumbling K]

Sal

pallets rip those belts up and send them up over the mountain! what kind of belt sander do you use I want one if it works! I tried everything, only thing I found that I have is a wheel with wire brush and then down to grits and then I can sand with my sander.  I saw on one of the AK shows I watch they used a hand planer that was kicken butt! but of course on pine   

-


Sal-gal, if you aren't removing the slats, be sure all the nails are flush or set below the wood


Eta : I have a Rigid tool. All of my hand power tools are Rigid.

 

[scflock]

sc got pics of the coops you build

Here's a couple. Let me find a few more

 

[scflock]

 

[Sally Sunshine]

Sal
-


Sal-gal, if you aren't removing the slats, be sure all the nails are flush or set below the wood


Eta : I have a Rigid tool. All of my hand power tools are Rigid

thanks for the tip

sc you can send a man slap him again



and thanks for the make

 

[scflock]

 

[scflock]

thanks for the tip

sc you can send a man slap him again



and thanks for the make

Ok

Sal
-


Sal-gal, if you aren't removing the slats, be sure all the nails are flush or set below the wood


Eta : I have a Rigid tool. All of my hand power tools are Rigid.

 

[Tumbling K]

thanks for the tip        sc you can send a man slap him again 



and thanks for the make 

Tip of what?

I've used pallets allot and never tore up a belt EXCEPT on protruding nails.

 

[Tumbling K]

For you sc.

 

[Sally Sunshine]

very cool, I love the first one! and most of the wood is from "trash" at work? and you sell them, list them on CL? thats awesome! Where do you find the roofing? thats the most expensive part. My oldest son bought me a dewalt compressor and a four set nailer stapler set a few years ago, I love them! I have bought a few more nailers, makes projects go so fast, even putting fencing up outside. If I could get into doing more little stuff I can get out of doing the other stuff I dont want to do anymore, like watching kids here and there.. I have kids since I was 20 and I love kids but man I need a break. and besides fishing I love my woodworking and building stuff. but I dont want to ruin what I already do though.