jvls1942

I'm sure you can get some. You will probably need to buy about 5 pieces in a prepackaged envelope now. That is how things get sold now.
Ace Hardware by me does still have a set of drawers with different screw types, that you purchase as many as needed.
yeah, that's how things are sold now a days.
I need only one right now, maybe one more later on.
I could buy just one online, .89 cents, but the
shipping is $8.oo.
I can use the tractor as is, in a pinch..
If it were above 55F, I could JB weld a nut on it.
In my next life I will have a heated garage.
and as long as I am at it, I am going to be filthy rich.
 

jvls1942

I'm sure you can get some. You will probably need to buy about 5 pieces in a prepackaged envelope now. That is how things get sold now.
Ace Hardware by me does still have a set of drawers with different screw types, that you purchase as many as needed.
One of the Ace hdwe stores has jack nuts by the each. $1.45/ea
only up to 1/4" though.. I will give it a try. I would prefer
a larger size..
 
Do you have a local "non-chain" hardware store? They might have different products
we used to have a few of those, but they are
long gone. the box stores drove them out..
I miss them.
I decided to drill a hole all the way through the
other side of the tubular frame and just run
a long 3/8" bolt all the way through and nut it.
tomorrow is supposed to be 38F and sunny.
I'll dress warm and bite the bullet for a half hour.
we had freezing rain this morning. a couple
of trees broke off or lost big branches.
we call that volunteer firewood..
 

New posts New threads Active threads

Back
Top Bottom