Genesis 1588 with 1610 egg turner

Ole Bubba

In the Brooder
11 Years
Joined
Aug 23, 2008
Messages
55
Reaction score
0
Points
29
Location
Ouachita Mountains of Arkansas
I just got my new1588, whee. It has been set up for 24 hours, I do not think that the turner motor is working. Should the motor be warm to the touch?
 
Last edited:
Quote:
Bubba, it should be about 99.5 degrees warm to the touch.
smile.png
 
My turner motor makes a really quiet ticking sound. So see if you can hear anything. Or watch it over an hours time and see if it shifts direction.
 
Hi Olebubba!
I have the same set up as you. That motor on the turner does run very warm. Can you hear the turner kind of make a click sound ever so often? They move very slow.
Carolyn
 
Those motors turn at 1 revolution every 4 hours. So they turn the eggs once every 2 hours.

With the eggs turned one way, check in 2 hours and they should be fully the other way. In one hout they should be upright.
 
What twigg said. Check your eggs, then again after 2 hours. I thought my turner was broken cuz every time I looked the eggs were facing the same way -- went out and bought a new one, read the info that came with it... THEN did a 2 hour test and found out the old one was just fine. Now I have to buy another incubator to go with the extra turner I have..........
wink.png
 
Also check the little arm that comes out the side of the motor that it's in the slot. One of mine wasn't in the slot so the arm was turning, but not moving the trays.
 
It ain't moving. I checked every hour for 4 hours.......no movement.
If the motor is like my LG one it is warm to the touch when running, and not in the incubator, right?
 
sheesh, Im of no help I can't even figure out how to set up the turner (put in the quail trays)
Good luck getting yours going:lol: :
th.gif

Stormy
 

New posts New threads Active threads

Back
Top Bottom