Hatching Advice needed please. !!!

Hdomaille

Chirping
Joined
Apr 14, 2020
Messages
76
Reaction score
60
Points
50
Day 23. A pip found at 2.30 am this morning. That’s 10 hours now. Beak has not broken through the membrane. No further development. Hear the odd Faint. peep. Egg not moving around. Humidity 68% temp 37.5 c . Do I need to make an air hole through the membrane if chick doesn’t do it by 12 hours?
 

Attachments

  • 4061A614-78D2-4FB8-925F-8F8E71131B4D.jpeg
    4061A614-78D2-4FB8-925F-8F8E71131B4D.jpeg
    289.6 KB · Views: 11
Day 23. A pip found at 2.30 am this morning. That’s 10 hours now. Beak has not broken through the membrane. No further development. Hear the odd Faint. peep. Egg not moving around. Humidity 68% temp 37.5 c . Do I need to make an air hole through the membrane if chick doesn’t do it by 12 hours?
Are there any other eggs inside? I will leave it a little bit longer, got chicks that took a full day to hatch. I assisted a stuck chicken before and no joke it took me a full day to free her from the shell.
 
Day 23. A pip found at 2.30 am this morning. That’s 10 hours now. Beak has not broken through the membrane. No further development. Hear the odd Faint. peep. Egg not moving around. Humidity 68% temp 37.5 c . Do I need to make an air hole through the membrane if chick doesn’t do it by 12 hours?
If there's a hole in the shell chickie is getting air. Give it a full 24 hours after you first see the pip before considering assisting. They tend to have a really quiet phase between the first pip and zipping. Also i find most of mine make a secondary pip several hours before they actually start zipping too. So don't worry too much if there's another crack and no progress right away.
 
Ok so it was really struggling to get the shell of .13 hour later still not poked through and only able to lift it up and down . I literally touched it and it fell off. The progress is very very slow . Will it be ok? It has taken 3 hours to get from first pic to second . No other pips or zips
 

Attachments

  • 2A487A4B-19EC-4FAA-B80E-CA629619CA17.png
    2A487A4B-19EC-4FAA-B80E-CA629619CA17.png
    2.9 MB · Views: 9
  • 35635492-5B50-4793-A0C9-00FA0F15BBCF.png
    35635492-5B50-4793-A0C9-00FA0F15BBCF.png
    3.7 MB · Views: 7
Ok so it was really struggling to get the shell of .13 hour later still not poked through and only able to lift it up and down . I literally touched it and it fell off. The progress is very very slow . Will it be ok? It has taken 3 hours to get from first pic to second . No other pips or zips
Still looks normal. Membrane looks good. ;) Give it time.
 
Not drying out now? Still chirping happily
 

Attachments

  • 5B354E93-33AA-490B-9A99-36DFC242ACFE.jpeg
    5B354E93-33AA-490B-9A99-36DFC242ACFE.jpeg
    295.9 KB · Views: 8

New posts New threads Active threads

Back
Top Bottom