opon
In the Brooder
- Dec 28, 2020
- 7
- 17
- 16
is it advisable to use 100w bulbs for heat source on a 4ft*3*3 incubator
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I would not. You do want them to sleep. You need to check temp at chick level bulb wattage doesn’t matter.is it advisable to use 100w bulbs for heat source on a 4ft*3*3 incubator
is it of too much heat?I would not. You do want them to sleep.
You can use a ceramic bulb in the lamp housing instead. It emits heat but no light.is it advisable to use 100w bulbs for heat source on a 4ft*3*3 incubator
You adjust the heat level by raising or lowering it based on the activity levels of the chicks.is it of too much heat?
With the lamp in place you need to check temperature at chick level that will tell you if good or notis it of too much heat?
i use a water heater temperature controllerWith the lamp in place you need to check temperature at chick level that will tell you if good or not
the space can accomodate 400 chicksYou adjust the heat level by raising or lowering it based on the activity levels of the chicks.
How many chicks do you plan to brood in the 4x3 area space?
No way can 12 sqft hold 400 chicksthe space can accomodate 400 chicks