HELP! Hovabator 1588 automatic turner NOT turning eggs

The 1588 is a forced air so the likelihood of hot spots is a lot less, but it’s still possible. Personally I like an automatic turner, I like not being tied to the incubator at certain times every day so I can go see a play or visit friends. But each of us is unique. We all have our preferences.

Here are the turner instructions. Make sure the trays are lined up right and that the slot in the bar that fits over the knob on the turner is not in a bind. I’ve had that bind issue before. Aggravating!

http://www.gqfmfg.com/PDF/Turner- Hova-Bator for internet.pdf

There are different reasons the eggs should be turned, especially early in the incubation. Not turning them “can” cause problems. But there are a lot of things that “can” happen that never do. Odds are you will be fine.
See you have a life and things to do, where do you get one of those???
wink.png
lol

My LG has the fan-the one made for them and under the heating element is about 1-2 degrees warmer than the center and the far corners. I try to keep my eggs in the general area under the heating element if I don't have too many.
 
My hubby fiddled with it for quite a bit this morning. It needed the arms to be unstuck. I think it's back to working. Will keep track of it. Maybe when our life is a little less rushed we should try turning then ourselves.

We also discovered that the eggs needed to be spread throughout the tray, not evenly concentrated in the center (which is what I thought was ideal).

We candled the eggs and found at least 12 live eggs.
 

New posts New threads Active threads

Back
Top Bottom