Here We Go Again :-)

[merrymutts]

Both Incubators warmed up and ready to Rock 'n' Roll, so after church, I divided up some of our eggs and some of the shipped Bielefelder eggs between the two incubators and hit Reset so each one has the exact same settings and timers.

This was done so if something goes wonky with Incubator A ( Left )... I can immediately transfer eggs to Incubator B (right).

Incubator B is most interesting in that the manual says to place the eggs pointy end UP rather than down as noted in a lot of other incubators.

Wish us luck.....

 

[HuffleClaw]

Your humidity is too high Good luck!!

 

[RoosterML]

Your humidity is too high Good luck!!

Humidity @49 is good.

 

[HuffleClaw]

Humidity @49 is good.

There shouldn’t be condensation on the glass this early on.

 

[RoosterML]

There shouldn’t be condensation on the glass this early on.

Good point, maybe his gauge is off. I usually have just a tad of condensation in the lower for corners.

 

[HuffleClaw]

Good point, maybe his gauge is off. I usually have just a tad of condensation in the lower for corners.

Yeah, most incubators don’t come with reliable gauges. A separate •calibrated• thermometer and hygrometer are always best.