High temp alarm on my Brinsea Maxi II.

[1ADAM12]

Does anyone know why the high temp alarm keeps going off? My internal temp is 99.5 according to a internal therm I put In the incubator. All my high temp and low temp alarms are set to the default.

code is -RM

it goes off every 30 min and I just put the eggs in yesterday.

 

[1ADAM12]

I amaze myself sometimes. I found a video online and I just calibrated the incubator. Hopefully this fixes the problem.

 

[BrinseaUS]

Hello! "-RM" showing on the display is not related to the temperature of the incubator - it is the low room temperature alarm going off. Hold the "OK" to clear this off and then make sure the temperature in the room goes up. Page 10 of the user manual covers this.

In calibrating the incubator the temperature may not read accurately now. You may want to call and speak to our service technician. (888) 667-7009.

 

[1ADAM12]

Thank you. I have an internal temp inside the incubator that I know was calibrated and the temps were off.
Thanks again for your reply.