I don’t think the turner is moving

[LizFl]

Hi! So I’ve had the eggs in the nurture right 360 incubator for 2 days now, at the beginning I had some turning but it hasn’t turned since yesterday (I believe) I have a Govee inside and that has been in the same spot since yesterday.(that’s how I can tell it hasn’t turned). Now I’m worried about it, what can I do? Help please

 

[BirdsBeesTrees]

@CluckNDoodle @MGG ?

 

[Painted Calls]

I mark my eggs. X on one side and a number on the other. That allows me to see that they've turned.

 

[LizFl]

I mark my eggs. X on one side and a number on the other. That allows me to see that they've turned.

It’s my first time, didn’t think about doing that

 

[junior67]

you can open it up and mark the top of the eggs with an X. they will be fine having it open to do that. you can also hold (I think it is the + and - down at the same time and see if it turns if it does most likely it is turning them. Also press the first button (sorry don't have mine in front of me to remember what it says) to see what day it is one. I think you need to just press it twice for that. Is the incubator new? If not it may not be set to the right days and it stops turning the eggs at day 18 so if it says anything over 3 then the auto turner has stopped and it needs to be reset.

 

[junior67]

you can also ask on this thread (great for answers on the NR360) https://www.backyardchickens.com/th...rture-right-360-incubator-is-amazing.1294466/

 

[CluckNDoodle]

I mark my eggs. X on one side and a number on the other. That allows me to see that they've turned.

I was going to say the same.

Hopefully you just missed when it turned, it's easy to miss!

 

[Iluveggers]

If the incubator was not reset before setting the eggs, it will stop turning at some point. Hopefully resetting it will get it moving again!

 

[HollowOfWisps]

I agree mark your eggs. Nurture Right also has a built in turner test that you can use. Just press the "+"and "-" buttons at the same time and it will cause the incubator to do a test turn to let you know if the turner is working properly.

 

[gimmie birdies]

With my incubator, I place a marker, like a pen and if the eggs are leaning to one side in the turner, I put the pen on that side. Then when I check again I will not have to remember how they were aimed. (only if I think the turner was not working)