• giveaway ENDS SOON! Cutest Baby Fowl Photo Contest: Win a Brinsea Maxi 24 EX Connect CLICK HERE!

i really need help with my fan location in my homemade incubator!!!!!???

I think, depending on the size of the incubator, 25 watts may not be enough. The small cheap Little Giants have a 40 watt element.
Some of my DIY incubators (which are large cabinet type) have from 125 watt to 225 watts.
 
the incubator size is 1 feet 8 inches long 1 feet 2 inches wide and 1 feet 3 inches tall..and now i am using 40 watt incandecent bulb i will share a video its uploading now
 
i
If you are in a warm climate then it could work, I just don't know how to make it hold humidity for you, I think the cardboard would absorb most of your moisture.
had a succesful hatch in the past few weeks though but with this one i built another with a bigger set up and with all the installation of a fan which i never did before..
 
I'm sorry, My suggestion that you needed higher wattage heat source was based on the assumption that you were using a thermostat to keep the temperature at a steady temperature.
 
this is it lockdown and i will keep you guys updated
 

Attachments

  • image.jpg
    image.jpg
    389 KB · Views: 7

New posts New threads Active threads

Back
Top Bottom