Ice & Water Membrane to replace Vinyl on Drop Boards?

@amk122284 thanks for your suggestion.

My entire coop (10' by 16' walk in) cost about $1250 CDN for materials. I acknowledge that I live in an area that affords access to inexpensive wood (I used 1" by 6" rough cut pine in a board and batten style) so my cost is lower than many folks would have to pay.

My goal in building the way I did was to keep the cost as low as possible. I looked at your link and I would need to spend $150+. Using plywood will cost nothing as I have both it and BJ57 in hand.
 
Last edited:
Correct, there are multiple installation options but free floating is one of the most common! They have different tapes or adhesives you could potentially use but essentially I'm using it as a giant stall mat :)
Have you installed it yet?
Would love to 'touch' it....how flexible, heavy.
Sorry for the hijack @Ted Brown
 

New posts New threads Active threads

Back
Top Bottom