i can't get a hygrometer to work i swear! i have 4 hygrometers 2 i have decided dont work at all and the other 2 i have my doubts about. i calibrate all. they all were off at 10-12 hours by 10 one was 10 high the rest were 10 low. ok fine. put them in the incubator 2 flake immediately and are removed because the temp display went wacky so didnt trust the other reading either. of the 2 remaining one is digital and the other is the coil with the little hand that points to the number. the problem is that they dont seem to change even when i have added water to the trays. ( its a homemade incubator ) they read 24 and the other reads 30. one is low by 10 and the other is high by 10 ( according to calibration ) so with the #'s there giving me they still don't match and the humidity isn't right. any one have any ideas what to do?