INCUBATING w/FRIENDS! w/Sally Sunshine Shipped Eggs No problem!

Status
Not open for further replies.
Good afternoon everyone!
@campingshaws
celebrate.gif
yesss.gif
Beautiful new arrivals, about time
wink.png

@LocalYokel Congratulations on the chicks/keets. I hope you are well. Quail
droolin.gif

@ChickenCanoe Good luck with the traps. Mine are failing miserably.
@casportpony . I know you have had some bad hatches, may this one be a great one
fl.gif
.

My broody does not do an official lockdown, but here goes. Chicks due Thursday/Friday.

Good Luck!!
Really?.....how expensive are they?
I got a several just laying around.

Sometimes you have to factor in the Time your screwing around .....
i dont remember honestly, but too much at the time
 
every ground rod i ever worked with was copper......never saw a rusty ground rod
I always used copper clad too. Some fence manufacturers recommend zinc coated steel.

Excerpt from the National Electrical Code.
Sec. 250-56 of the 1999 NEC requires a minimum resistance to remote earth of 25 ohms for a grounding electrode
made of a rod buried at least 8 ft. When its measured resistance exceeds the 25 ohms, the Code requires the
installation of one additional ground rod to be located at least 6 ft away from the first. Sec. 250-52(c) requires that
the rod(s) be a minimum O.D. of ¾ in. if made of galvanized pipe, a minimum of 5/8 in. O.D. if solid iron or steel, and
a minimum of ½ in. if made of nonferrous material such as copper or stainless steel. Sec. 250-52(e) prohibits the ground
rods from being made of aluminum.

Sink it deep enough and it wouldn't be worth the effort.
So true.
When I set up electric for festivals it was a bear to get them out.

u know i need help but nobody believes me the wire i have have is not working the only thing that is not working the ground rod the box all of that works except the wire
Believe me, I believe you.
My best advice is to google the make and model of your unit along with the word "manual".

i dont think we could have made it more than the 2-3' down, which is still not enough, so we would have needed 3, and the cost was too great at that point
Without sufficient depth, you need multiple rods.


Wow!!! That's exactly what I need. Can you send me seeds?
 
I always used copper clad too. Some fence manufacturers recommend zinc coated steel.


Without sufficient depth, you need multiple rods.


Wow!!! That's exactly what I need. Can you send me seeds?
Yep, i have 3 ground rods, too much granite and ledge dormant volcano a couple towns away

i would love to send you seeds, but my plants hasnt matured yet and has therefore not begun to bear fruit
 
I always used copper clad too. Some fence manufacturers recommend zinc coated steel.

Excerpt from the National Electrical Code.
Sec. 250-56 of the 1999 NEC requires a minimum resistance to remote earth of 25 ohms for a grounding electrode
made of a rod buried at least 8 ft. When its measured resistance exceeds the 25 ohms, the Code requires the
installation of one additional ground rod to be located at least 6 ft away from the first. Sec. 250-52(c) requires that
the rod(s) be a minimum O.D. of ¾ in. if made of galvanized pipe, a minimum of 5/8 in. O.D. if solid iron or steel, and
a minimum of ½ in. if made of nonferrous material such as copper or stainless steel. Sec. 250-52(e) prohibits the ground
rods from being made of aluminum.

So true.
When I set up electric for festivals it was a bear to get them out.

Believe me, I believe you.
My best advice is to google the make and model of your unit along with the word "manual".

Without sufficient depth, you need multiple rods.


Wow!!! That's exactly what I need. Can you send me seeds?
just plant pennies
 
Status
Not open for further replies.

New posts New threads Active threads

Back
Top Bottom