INCUBATING w/FRIENDS! w/Sally Sunshine Shipped Eggs No problem!

Status
Not open for further replies.
@Sally Sunshine I wasn't sure why you said "sexy shorts Joey! toooooot tooooot sweet!!" but I think I may have figured it out...

FYI: That isn't a censor blur on my shorts... it's called a flash.
lau.gif
 
Sally Sunshine Yesterday at 11:35 am Good job getting the fan in son!! :highfive: Nope I dont think it matters, they should still get there around the same time, you can hold hers a day to settle since they are fresh [COLOR=FF0000]BUT LIKE I SAID[/COLOR] [COLOR=FF0000]AS LONG AS YOU HAVE FIXED THERMO/HYGROS by Sunday and you have them CALIBRATED and prove it to me too!!![/COLOR] chicken hawk 33 Yesterday at 11:41 am Ok,u could ship them today or tommorow and I could have them setting for room temp Sally Sunshine Yesterday at 11:45 am no I cant because you have to prove you can keep temps and humidity and calibrate, thats the deal If you can prove all that before 4pm I MIGHT be able to ship them out today!!! and I cant ship Saturday sorry pups are going home tomorrow chicken hawk 33 Yesterday at 11:47 am Ok chicken hawk 33 Yesterday at 11:48 am My friend the engineer is coming later to hook up the fan Sally Sunshine Yesterday at 11:53 am maybe he can help calibrate [COLOR=FF0000]WHY YOU SHOULD CALIBRATE and link to HOW:[/COLOR] [COLOR=008080]post #545 also see calibration in Hatching Eggs 101 TEMPS SECTION[/COLOR] [COLOR=FF0000]EASY Calibration[/COLOR] post #19746 bottom of post #20480 chicken hawk 33 Yesterday at 12:00 pm He wont be hooking it up.Donny have the stuff but he will look at it. chicken hawk 33 Yesterday at 12:04 pm The other thermometer is inn thought it was better but this is it. Sally Sunshine Yesterday at 12:07 pm CALIBRATE IT!! use the links and CALIBRATE!! chicken hawk 33 Yesterday at 12:23 pm How Sally Sunshine Yesterday at 12:31 pm I GAVE you the links CH.... you are going to have to learn to READ and help yourself at times!!!! SERIOUSLY I give you my time, I cant hand hold you like a 6 year old! you are 16.. you can CALIBRATE a thermometer!!! go read about the ice test!!! in those links!!! OR YOU GET NOTTA!! and dont ask on the thread or I aint sending you any either!!! chicken hawk 33 Yesterday at 12:39 pm Ok,how fast does the fan have to blow.he is here helping me wire it. Sally Sunshine Yesterday at 12:48 pm it can only blow as fast as the Volts you are using the 5? it wont blow much but its better than none until you can get another, take pics for yourself so you know how to rewire a new one whenyou find a used one chicken hawk 33 Yesterday at 1:10 pm It's a 12v I found one.but is doesn't blow hard we wired it too the plug just have to put in the bator Sally Sunshine Yesterday at 1:14 pm take a pic of how hard it blows a tissue and post it on the thread quick..... chicken hawk 33 Yesterday at 1:19 pm How it won't show how hard it blows it Sally Sunshine Yesterday at 1:26 pm a tissue doesnt move near the fan??? chicken hawk 33 Yesterday at 1:31 pm What Sally Sunshine Yesterday at 1:32 pm hold a tissue OPEN in front of the fan and see if it makes the tissue blow a bit post a pic on the thread chicken hawk 33 Yesterday at 1:37 pm She said she will have 15 maybe a few more. Sally Sunshine Yesterday at 2:30 pm k chicken hawk 33 Yesterday at 2:31 pm How do I want it blowing on the inside Sally Sunshine Yesterday at 2:37 pm if that was mine without a baffle on it I would place it so that the air blows to the top of the bator and spreads outward, so THAT ITS NOT BLOWING DIRECTLY DOWN ON EGGS but upwards to blow up and then it will flow out to the heating elements.... so place upsidedown with plenty of shims/distance between the lid and fan. chicken hawk 33 Yesterday at 2:40 pm What's a baffle Sally Sunshine Yesterday at 2:42 pm a cover to send the air outward instead of down chicken hawk 33 Yesterday at 2:44 pm I don't understand Sally Sunshine Yesterday at 3:04 pm turn the fan upside down so its blow air at the top of the lid where its going to be placed keep room between the fan and bator for the air to circulate chicken hawk 33 Yesterday at 3:07 pm Ok,I guess Sally Sunshine Yesterday at 3:11 pm ask your mom if she can call me quick or dad or adult Sally Sunshine Yesterday at 3:18 pm show me a pic of your fan chicken hawk 33 Yesterday at 3:18 pm I know what u mean.I'm think if I should just try this hatch without it.I said the fan down standing up to just text but it went all the way up too 115 chicken hawk 33 Yesterday at 3:20 pm chicken hawk 33 Yesterday at 3:21 pm Sally Sunshine Yesterday at 3:22 pm NOOOOOOOOOOOO leave the fan in it!!!! Sally Sunshine Yesterday at 3:24 pm it has to go on the top with long screws AND something to shim it out from the top THIS IS THE LID LIKE THIS!! but air up do the lid not down on eggs!!! Sally Sunshine Yesterday at 3:34 pm you understand now ? chicken hawk 33 Yesterday at 3:39 pm A B S O L U T E L Y Sally Sunshine Yesterday at 3:40 pm serious??? dont pull my leg CH air has to hit up at that styrofoam not down... to where your eggs sit when closed chicken hawk 33 Yesterday at 3:47 pm ?? What u mean sit when closed Sally Sunshine Yesterday at 4:02 pm CH really??????????????? after the lid is on top of the bator, the fan should point up to the glass on top NOT down to your eggs chicken hawk 33 Yesterday at 4:04 pm Yes,I understand I am going the engineers house to hook it up to the lid. What kind of eggs. Sally Sunshine Yesterday at 4:05 pm I told you what kind.... and only if you can calibrate on your own using those links and get this dang fan in CORRECT!!!! YOU DO NOT want it blowing down directly on eggs chicken hawk 33 Yesterday at 4:08 pm I know. Sally Sunshine Yesterday at 4:13 pm :highfive: awesome CH!! chicken hawk 33 Yesterday at 6:54 pm It's all set up Sally Sunshine Yesterday at 6:58 pm awesome!!! get steady temp running and calibrate thermometers chicken hawk 33 Yesterday at 11:01 pm I am chicken hawk 33 Yesterday at 11:25 pm Are u shipping yours tommorow Sally Sunshine Today at 12:21 am no I cant ship until monday, told you my puppys leave tomorrow and all the new families are coming, cant get to post office chicken hawk 33 Today at 12:23 am Ok that's fine hope they get here at the same time the lady is only an hour away. chicken hawk 33 Today at 10:11 am What temp to keep the bator at now that I have the fan Sally Sunshine Today at 10:36 am 100 calibrated temp.. what is humidity without adding water? chicken hawk 33 Today at 10:46 am Ok it shows 101 on the blood like stuff thermometer.and on the electronic one it shows 37.4C and humidity is 30 % with no water Sally Sunshine Today at 10:52 am https://www.google.com/search?q=celcius+to+farenheit&ie=utf-8&oe=utf-8 you did the ice water calibration for the stick thermometer? Sally Sunshine Today at 10:58 am HERE ARE MIN and MAX temps for Celcius Sally Sunshine Today at 10:59 am Sally Sunshine Today at 11:00 am [COLOR=FF0000]ps 30% is good until first candle [/COLOR] chicken hawk 33 Today at 11:13 am Okay and the stick shows 101 chicken hawk 33 Today at 11:17 am The other lady wants to know if I want her to ship in the morning or afternoon Sally Sunshine Today at 11:22 am watch the video? Use your human thermometer and get a cup of warm water, and the human one will be calibrated all ready, let them sit in the water a minute and take a pic of all the thermometers in the water at once including the human one, put the probe to the electronic one in the water too.... all thermometers should be the same temp..... if not we need to do an ice water bath to reset them. chicken hawk 33 Today at 11:34 am There the same temp spot on.hope the bator is actually that temp though.they both the same temp. Sally Sunshine Today at 11:40 am you said one said 101 and the other 37.4 = 99.32 THE ARE NOT SPOT ON!!! chicken hawk 33 Today at 11:44 am I just took our fourty dollar thermometer its the ear one.I stuck it In the one air hole and it only read 96.7.and when should she ship her eggs to me morning or evening. chicken hawk 33 Today at 11:58 am ?? Sally Sunshine Today at 12:38 pm CH that wont work doing the ear in the air hole! evening ship Sally Sunshine Today at 12:48 pm GET a GLASS note I said GLASS of warm water add your thermos like I said above.... after several minutes use the ear thermometer on the onside of the glass at the bottom...... take a pic and tell me what they all read please!!!! Sally Sunshine Today at 12:50 pm GET a GLASS [COLOR=FF0000]note I said GLASS[/COLOR] of warm water add your thermos like I said above.... after several minutes use the ear thermometer on the onside of the glass at the bottom...... take a pic and tell me what they all read please!!!! chicken hawk 33 Today at 1:41 pm The thermometer won't fit in a glass chicken hawk 33 Today at 1:47 pm When should your a get here.I put a piece of rock.I just took it out and used the ear thermometer it read 98.4 and that was just 30minutes of being in their chicken hawk 33 Today at 1:47 pm I shipping in the morning for them to get here at the same time. Sally Sunshine Today at 1:58 pm THIS WILL FIT IN A GLASS
LL
and the probe from the other will too!! GET a GLASS [COLOR=FF0000]note I said GLASS[/COLOR] of warm water add your thermos like I said above.... after several minutes use the ear thermometer on the onside of the glass at the bottom...... take a pic and tell me what they all read please!!!! NO EGGS until you calibrate!! chicken hawk 33 Today at 2:11 pm It's as wide as the white thing it's stapled to a plastic the size of the white cardboard Sally Sunshine Today at 2:25 pm the cardboard is for the packaging !!! the plastic part you can mold into the glass of water!!! just roll it just a bit to stick it in!! why are you giving me so many excuses to NOT cailibrate? I am soon going to end our conversation unless you start listening to what I say.
701240_lo.jpg
chicken hawk 33 Today at 2:27 pm Ok,what do u mean onside the glass and how warm Sally Sunshine Today at 2:35 pm a little cooler than bathtub water..... fill the glass up and let it sit for 5 minutes empty then add the probe and add the above, just fold/roll it a bit to fit in. after they are in a bit and registering, see how close they are..... then put your EAR thermo on the OUTSIDE of the glass towards the bottom, but still where water is inside. and see if it reads closest to either of the ones in the water chicken hawk 33 Today at 2:44 pm I just checked the rock it was 99.2 chicken hawk 33 Today at 2:51 pm There way off. Sally Sunshine Today at 2:56 pm [COLOR=FF0000]the rock will take hours to heat up!!! t[/COLOR] [COLOR=FF0000]hats why I said do the glass....[/COLOR] so if your not doing the glass WAIT until tonight to check the ROCK!!!!! THEN TALK TO ME about them being WAY OFF. chicken hawk 33 Today at 2:59 pm The probe read 105 and the other read 100 Sally Sunshine Today at 3:02 pm and the ear thermometer read? chicken hawk 33 Today at 3:03 pm 96.5 or so chicken hawk 33 Today at 3:25 pm I guess I won't get eggs since they won't work chicken hawk 33 Today at 3:29 pm Now there not right at all after putting the probe in water hope I didn't brake it chicken hawk 33 Today at 3:42 pm HELP HELP,the ice water isn't working . Sally Sunshine Today at 3:49 pm whut now? puppy parents just left chicken hawk 33 Today at 3:53 pm Ok I am doing the ice water.the one with the probe shows 6.9C witch is 44 degrees Fahrenheit which it does not show how to calibrate it to 32 degrees freezing for the water now it says 7.1 Celsius which is 44.86 I think and the other one with the blood stuff shows,34 degrees Fahrenheit chicken hawk 33 Today at 4:06 pm I can't get them too work Sally Sunshine Today at 4:23 pm :pop chicken hawk 33 Today at 4:25 pm Y u won't help me.Okay just got the one with blood like stuff too 32 Fahrenheit. the one with the probe I got too 3.0 CELSIUS Sally Sunshine Today at 4:31 pm ok so you now the glass thermometer aka blood stuff one is correct stick the probe in the water more, and while it is in there take out the battery and wait a few seconds and then put it back in and see if that recalibrates it Sally Sunshine Today at 4:32 pm and I am sorry, I am making supper CH!! you need to settle some. chicken hawk 33 Today at 4:32 pm Ok chicken hawk 33 Today at 4:33 pm It won't fry it putting it all the way under the water Sally Sunshine Today at 4:34 pm ok so you now the glass thermometer aka blood stuff one is correct so move on to the probe one...... stick the probe in the water more, and while it is in there take out the battery and wait a few seconds and then put it back in and see if that recalibrates it Sally Sunshine Today at 4:36 pm JUST THE PROBE PART!!!!! chicken hawk 33 Today at 4:37 pm Nope only at 2.9CELSIUS Sally Sunshine Today at 4:38 pm let it in longer than that!! it takes three minutes to take our temperature !!! chicken hawk 33 Today at 4:46 pm I have in there 10 minutes if not more. Sally Sunshine Today at 4:52 pm and you took the battery out while the probe is in there ? chicken hawk 33 Today at 4:57 pm Yes Sally Sunshine Today at 5:09 pm so what is it reading? chicken hawk 33 Today at 5:11 pm The lowest I got was 2.8 now lower and it sat for like 20 minutes under ice in the water Sally Sunshine Today at 5:15 pm ok go put the glass thermometer back in the bator and the probe and let them sit, you will have to go by the glass thermometer chicken hawk 33 Today at 5:19 pm Ok,so I don't get any eggs from u. chicken hawk 33 Today at 5:19 pm Beings I couldn't calibrate them. Sally Sunshine Today at 5:21 pm you did calibrate! you got freezing temp on the glass, go with this one chicken hawk 33 Today at 5:41 pm Ok,the engineer is at my house u don't want too go over 101 right with circulated air. Sally Sunshine Today at 5:43 pm keep it between 100 -101 Sally Sunshine Today at 5:44 pm what is the ear temp on the stone/rock? chicken hawk 33 Today at 5:46 pm He brought his stuff he did the math and all and its perfect between 100 101.he works for Malaysians cat he knows all that stuff.he said it couldn't be more perfect .and humidity is 20% Sally Sunshine Today at 5:48 pm what math? chicken hawk 33 Today at 6:02 pm Using a fluke 87v temp probe, regular temp probe, blue point infrared thermal scanner, and mini LCD thermometer we were able to get as accurate of an inside temp as possible. We r at 100 degrees f +- .5 degrees f. chicken hawk 33 Today at 6:03 pm That was the engineer sent u that. Sally Sunshine Today at 6:04 pm and what are the thermometers reading, so you know what that number reads on them? your temp will need adjustments later when embryos put off heat! chicken hawk 33 Today at 6:07 pm Yep got that.temps are perfect.humidity is 15% so will I need to add water when I put the eggs. chicken hawk 33 Today at 6:07 pm Temp couldn't be more perfect Sally Sunshine Today at 6:08 pm you have any of those plastic easter eggs? to use halves to add water and take out? they fit in your turners chicken hawk 33 Today at 6:21 pm ??I don't understand Sally Sunshine Today at 6:26 pm a plastic easter egg for easter, do you have any? you can use half of one to put water in, then it fits in your turner
spiders_from_easter_eggs_01.jpg
chicken hawk 33 Today at 6:55 pm No I dont chicken hawk 33 Today at 7:47 pm So I many troughs do no fill when I add the eggs.it's a ten percent humidity. chicken hawk 33 Today at 7:48 pm How chicken hawk 33 Today at 7:54 pm When should your eggs get here. chicken hawk 33 Today at 7:54 pm It's still holding perfect temps. Sally Sunshine Today at 7:54 pm put pennies in before 1985 so you dont get mold in the wells, copper keeps that at bay.... older pennies have the right copper in them find a little dish that fits aside yer turner, like a salad cup or something. try not to use the bottom ones until hatch chicken hawk 33 Today at 7:56 pm I don't have nothing that's fits in them.I always used the troughs Sally Sunshine Today at 8:03 pm always as in once!!!!! use yer head and think about a container you can cut down to fit that area aside the turner!! I used my head to add this to my cooler!!!
[COLOR=005CB1] [/COLOR]

[COLOR=005CB1]
[/COLOR]

caulked! excuse the rusty caulk, I had a nail in the caulk and then I had tape over it to keep the caulk good for next use
hmm.png


[COLOR=005CB1]
[/COLOR]

[COLOR=005CB1]
[/COLOR]
I had to cut the other end down as my sponge is big, I still had to cut my sponge though.
Works like a charm, plenty of room for eggs to hatch AND it holds extra water to pull from!

I used two galv screwed to the side of the bator
[COLOR=B42000]
[/COLOR]
chicken hawk 33 Today at 8:11 pm There is no room for that in my. Bator.there is no room aside the turner Sally Sunshine Today at 8:18 pm ok yeah I am on the thread post there, use the smallest one chicken hawk 33 Today at 8:35 pm Do u have the eggs your sending if so could I get a pick. Sally Sunshine Today at 8:41 pm No I dont, they hens didnt lay them yet! you will see them when you get them, I promise that chicken hawk 33 Today at 8:45 pm Ok.when should they get here Sally Sunshine Today at 8:59 pm when the driver is in your area and they are on the truck next week
y.you did that.:(:(
 
Status
Not open for further replies.

New posts New threads Active threads

Back
Top Bottom