He said wasn't worth it.... Yes he was offered but the contract was crap.... And he's rather be a fishing guide.... He's extremely passionate about it.
You should see this guy's boats.
Good family owns a flooring contractor business.... He does a lot of side work with them too.
Yup good all around kid but wouldn't want to get him mad....
Oh he didn't do that my friend.... Is bragging him up..... Cuz he's that impressive to me. He grew up around my home with my kids.... Know his whole family..... Thanks Benny
To going again gonna go get me some better waders though.... Ones that won't pull down so hard on my shoulders.
Hi
Have a good one Dax
12.4 isn't good.... A good battery should read 12.6......a battery that sits a while can fall down to 12.4 but voltage is just voltage.
A machine like my battery tester would tell you cranking amps and state of charge..... And battery condition.
But you can have could voltage and not have any amperage to run anything.
I'm not sure of how much you've read about all that went on, but when the battery wouldn't crank it fast enough I jumped it from the truck directly to the cables; no battery involvement. Still wouldn't crank @ full speed. Then I pulled both plugs, burned off any oil on them, & shot starter fluid down the holes. Pulled the air cleaner & washed it.Sprayed the carb port with starter fluid. Hit the switch & it fired up just fine. Reattached the battery cables, removed the jumper cables, & it started right up.Ran perfectly 'til it threw the drive belt, & that's where it is now.
He said wasn't worth it.... Yes he was offered but the contract was crap.... And he's rather be a fishing guide.... He's extremely passionate about it.
You should see this guy's boats.
Good family owns a flooring contractor business.... He does a lot of side work with them too.
Yup good all around kid but wouldn't want to get him mad....
Oh he didn't do that my friend.... Is bragging him up..... Cuz he's that impressive to me. He grew up around my home with my kids.... Know his whole family..... Thanks Benny
To going again gonna go get me some better waders though.... Ones that won't pull down so hard on my shoulders.
Hi
Have a good one Dax
12.4 isn't good.... A good battery should read 12.6......a battery that sits a while can fall down to 12.4 but voltage is just voltage.
A machine like my battery tester would tell you cranking amps and state of charge..... And battery condition.
But you can have could voltage and not have any amperage to run anything.
Don't your waders have belt loops. I used a belt with mine. Not only took pressure off the shoulder straps; also prevented water from filling them if I'd gone under.