Information on ducks and the proposed duck enclosure

I used 1/2 inch schedule 40 PVC. It is a little flimsy but it has held up fairly well. I did have to modify my original design (actually just thoughts) and add the vertical supports across the center.

Also there are 5 ft sections of PVC that are driven into the ground about 1 ft and tie wrapped to the fence posts. I did use PVC glue to hold everything together too.

My original design was to put 2 or 3 4x4 posts up with a really long 2x4 running down the middle and just drape the netting over the top. The reason I went with the PVC design was because it was cheaper - a lot cheaper.
 

New posts New threads Active threads

Back
Top Bottom