Quote:
Yes, Mickey, it can be used in HE washers--that's what I have. I will try to drop a Word document into this reply with 2 recipes. Well that didn't work! Here's the Powder recipe. Will post the liquid recipe separately.
Powdered Soap recipe
Each batch yields approximately 32 ounces
(between 32-64 loads based on how many Tbsp used per load).
Thoroughly stir together for 5 minutes and enjoy the results!
I USED MY FOOD PROCESSOR TO GRATE & MIX EVERYTHING TOGETHER. A BLENDER WOULD WORK WELL TOO.
High Efficiency (HE) Washers
HE front-load washers require “special soap” for one reason alone – low suds. Because they use less water, they require soap that is less sudsy. The good news is,
this homemade detergent is VERY low suds. The ”special” HE detergent is just another advertising mechanism to push consumers to buy “special soap” for unnecessarily high prices.
Regardless of your washer type, just make your own in confidence.
Safe for septic tanks and fields
This is the best laundry soap to use with septic tanks because it contains zero phosphates and zero fillers (like montmorillonite clay) that cause commercial powder detergents to clog lines. It is also completely non-toxic so it will not harm necessary septic bacteria like toxic detergents and antibacterial soaps.
Use with confidence.
Detergent directions (1 tablespoon of detergent per load 2 for heavily soiled load)
I’ve been using the powdered one lately because it’s easier to make than the liquid. But I found a liquid recipe that you can make 1 gallon at a time rather than the 5 gallon one I had been using. We’ve been using this homemade stuff for over a year maybe even 2 years and it works well. You won’t notice a lot of suds or a fragrance with either of these recipes. You can put a few drops of essential oils (which you can find online or at a health food store)you’d like a fragrance but I don’t bother.