Lab Incubator

Discussion in 'Incubating & Hatching Eggs' started by sawmill, Mar 11, 2017.

  1. sawmill

    sawmill New Egg

    Mar 11, 2017
    I recently come across 2 lab incubators that where not being used and they where given to me. I have been looking to make my own out of a mini fridge but I ran across these and I think they would work but not sure. Also what to do about humidity if it will work? The only down side I see is the controls are located inside but if it holds temp ok should be fine. I was thinking about also putting a glass on the door so you could see inside. Any help and/or ideas would be greatly appreciated. Thanks!


    Product Description Undercounter unit is equipped with a high and a low temperature safety thermostat as a backup to the primary control thermostat. Features sheathed heater, forced air circulation with built-in duct system, and plastic drip pan. Dial thermometer gauge on door. Positive vinyl door gasket seals door tightly to maintain chamber environment. Steel construction with acrylic exterior and ABS plastic interior. Foamed-in-place polyurethane insulation.
    Temperature Range: 5 to 50C (41 to 122F)
    Temperature Stability: +/- 1.5C
    Temperature Uniformity: +/-0.5C
    Temperature Control: +/-0.5C
    Capacity: 78 B.O.D. bottles
    Volume: 4.6 cubic feet
    Number of Shelves: 2 adjustable; 3 in door

    [​IMG] [​IMG]
  2. gpop1

    gpop1 Chillin' With My Peeps

    May 2, 2015
    I can not get to really see the pictures as they remain tiny when opened but it looks like it can be made into a incubator with very little work. My only concern is adding vent holes as you have no idea where it is safe to cut a hole.

    Nice find and free is always the right price
  3. sawmill

    sawmill New Egg

    Mar 11, 2017
    Yes it is and Thank You!

BackYard Chickens is proudly sponsored by