I just bought a project GQF model 1402 circa 1998. While the chassis is good, the previous owner disassembled the turner wiring and I am trying to get it back together.
The wiring from the turner motor to the AUTO terminal of the switch was broken, I repaired that. When I turn the switch to AUTO, the turner lamp flickers momentarily, same when I turn to manual. The motor does not turn with either switch position.
My immediate question is the wiring between the limit switch and the roller switch. Does the NO go to NO, nor NO to NC and NC to NO? I downloaded the hand sketched diagram from the GQF site but it was NO to NC. I switched the wire and it still did not work, same results.
Does anyone have a good wiring schematic or test sheet for the turner?
Thanks in advance!
The wiring from the turner motor to the AUTO terminal of the switch was broken, I repaired that. When I turn the switch to AUTO, the turner lamp flickers momentarily, same when I turn to manual. The motor does not turn with either switch position.
My immediate question is the wiring between the limit switch and the roller switch. Does the NO go to NO, nor NO to NC and NC to NO? I downloaded the hand sketched diagram from the GQF site but it was NO to NC. I switched the wire and it still did not work, same results.
Does anyone have a good wiring schematic or test sheet for the turner?
Thanks in advance!
