Low humidity troubles

Hyland 79

In the Brooder
Joined
Mar 10, 2020
Messages
11
Reaction score
6
Points
13
I bought a Harris Farm nurture 360, I cannot get the humidity up passed 44.. any suggestions??
I have the vent closed as far as it said to. But doesn't seem to help..
 
I bought a Harris Farm nurture 360, I cannot get the humidity up passed 44.. any suggestions??
I have the vent closed as far as it said to. But doesn't seem to help..
do you have a salt-tested hygrometer to compare for accuracy?
 
:welcome :frow I have never used that incubator. I would also suggest you make sure your thermometer and hygrometer are calibrated. What day are you on. I usually incubate at <40% on my humidity. The eggs need to loose some moisture and if the humidity is too high it can cause problems. When I take the eggs out of the incubator and put them in the hatchers, I get the humidity up to around 75%. I just put 5 dozen eggs in my incubator. Good luck and have fun...
 
:welcome :frow I have never used that incubator. I would also suggest you make sure your thermometer and hygrometer are calibrated. What day are you on. I usually incubate at <40% on my humidity. The eggs need to loose some moisture and if the humidity is too high it can cause problems. When I take the eggs out of the incubator and put them in the hatchers, I get the humidity up to around 75%. I just put 5 dozen eggs in my incubator. Good luck and have fun...
 
I have not put the eggs in yet. It said to get the temperature /humidity stabilized first, temp is good, humidity gets up to 44%and drops to about 41% through the night.
 
I have not put the eggs in yet. It said to get the temperature /humidity stabilized first, temp is good, humidity gets up to 44%and drops to about 41% through the night.

The humidity will rise once you have eggs in the incubator. It's a good idea to get a secondary thermometer just to double check your unit even though both of my NR360s were spot on I have heard one person say they adjusted it a little bit.
 

New posts New threads Active threads

Back
Top Bottom