My Incubator is too big......

[Robo]

Well I made the frame of my new cabinet incubator, and I can't get it out of my room. It is a 3x3x3 box, and my door is only 32 inches so it looks like I'll have to cut some off of the top. With 2 turners in it 3ft wide is about the minimum length and width so it looks like I will have to take it apart for the third time......

 

[Buttercup Chillin]

Quess that's why they make them tall and narrow with shelves. Make 2.

 

[Robo]

I think I'm gonna make it shorter so I can fit it through on it's side.

 

[JJMR794]

ALL THIS FUSSIN AND WHININ WHY DONT YOU JUST CUT THE DOOR OUT BIGGER?

 

[peewee]

That was the first thought that crossed my mind when I read this.

That sounds like something I would do. Hubby gets a good case of the shivers when I start to pick up the power tools!

 

[Robo]

Well I got a new Dewalt saw and drill set for Christmas I could do that, but then I would have to cut a path to it since the hallway is narrow in that one spot.... I don't like messing with sheetrock.

 

[JJMR794]

Will It Fit Thru The Window???


He He He...

 

[Robo]

Ya know it will, I don't even have to take the screen since it is already shot out.

 

[JJMR794]

Shove That Badboy Out On The Lawn Then Walk Around And Pick It Up And Move It To Its Destination....




There See? That Was Easy !

 

[Buttercup Chillin]

Quote:
Ya, DH helped move a piano once. Carpenter took the window out - they took the piano out - carpenter put the window back in.

He's replaced all the windows, here. Says they aren't hard at all.